A1140 Fuel Resistance Chlorine Tester Introduction
A1140 anti-fuel chlorine content tester is designed and manufactured according to DL / T433, GB / T388. It is suitable for determining the chlorine content in fuel resistance, and also for determining the sulfur content in heavy petroleum products such as lubricants and heavy fuels. Widely used in power, petroleum, chemical, commodity inspection and scientific research departments. Features
The oxygen bomb method is used to burn a chlorine or oil sample in an oxygen-filled oxygen bomb. After combustion, titrate with mercury nitrate or barium chloride.
Measurement processes such as oxygenation, ignition, cooling, etc. are performed by the instrument.
The overall structure is reasonable, safe and convenient. Technical Parameters
Oxygen bomb pressure: ≥20MPa
Ignition voltage: 12 ～ 24V
Repeatability: 0.0006%
Ambient temperature: 5 ℃ ～ 40 ℃
Relative humidity: ≤85%
Working power: AC220V ± 10%, 50Hz
Power consumption: <500W
Cooling method: Built-in powerful air cooling
Dimensions: 300mm × 290mm × 420mm
Weight: 7.2kg
Introduction
A1140 anti-fuel chlorine content tester is designed and manufactured according to DL / T433, GB / T388. It is suitable for determining the chlorine content in fuel resistance, and also for determining the sulfur content in heavy petroleum products such as lubricants and heavy fuels. Widely used in power, petroleum, chemical, commodity inspection and scientific research departments.
