Introduction: The TY101A series drying oven is made of angle steel and thin steel plate. The aluminum alloy fiber is insulated between the outer casing and the working chamber. The surface is covered with high-temperature silver paint. The heater is installed at the bottom (or both sides) of the studio. The desired effect is achieved by horizontal hot air circulation. The room temperature can be adjusted directly from +10 ° C to 300 ° C. The temperature range of the foamed silicone rubber sealing strip is from room temperature + 10 ° C to 250 ° C. Adapt to the industry: suitable for precision baking, drying and tempering in electronics, motors, telecommunications, electroplating, plastics, hardware chemicals, printing, PC board, powder, impregnation, spraying, glass, ceramics, wood building materials, etc. , preheating, stereotypes. Technical Parameters: Product Certification ISO9001: 2008 JB/T5520-1991 Power: 4500(W) Material: Cold rolled sheet Type: Electric blast drying oven Temperature range: 0—300 (°C) °C Brand: Tong Yun Model Number: 101A-3 Custom processing: Yes
Introduction: The TY101A series drying oven is made of angle steel and thin steel plate. The aluminum alloy fiber is insulated between the outer casing and the working chamber. The surface is covered with high-temperature silver paint. The heater is installed at the bottom (or both sides) of the studio. The desired effect is achieved by horizontal hot air circulation. The room temperature can be adjusted directly from +10 ° C to 300 ° C. The temperature range of the foamed silicone rubber sealing strip is from room temperature + 10 ° C to 250 ° C. Adapt to the industry: suitable for precision baking, drying and tempering in electronics, motors, telecommunications, electroplating, plastics, hardware chemicals, printing, PC board, powder, impregnation, spraying, glass, ceramics, wood building materials, etc. , preheating, stereotypes.
