ZY6014B single wire and cable vertical burning test machine Introduction
The single wire and cable vertical burning test machine is suitable for the flame resistance test of various wire and cable insulation coating materials PE, PVC and SRPVC. During the test, it is made according to the test standard of GB/T18380.11-2008. The ends of the sample are fixed and placed vertically in a metal cover with three sides being metal plates. Ignite the torch so that the tip of the blue inner cone touches the surface of the specimen and keeps the burner at 45° to the vertical axis of the specimen.
Technical Parameters
The technical indicators all meet the standard requirements.
The combustion gas is pure 95% propane gas.
The inner diameter of the nozzle is 12.0 mm and the nozzle outlet is 7.0 mm.
The control box is 350mm long, 340mm wide and 445mm high.
The metal cover is 430mm long, 300mm wide and 1210mm high.
Vertical burning test was tested for wire and cable length: 600 ± 25 mm.
Introduction
The single wire and cable vertical burning test machine is suitable for the flame resistance test of various wire and cable insulation coating materials PE, PVC and SRPVC. During the test, it is made according to the test standard of GB/T18380.11-2008. The ends of the sample are fixed and placed vertically in a metal cover with three sides being metal plates. Ignite the torch so that the tip of the blue inner cone touches the surface of the specimen and keeps the burner at 45° to the vertical axis of the specimen.
