Overview: The instrument adopts the principle of microcoulomb titration: the sample to be measured enters the salt electrolysis cell, the Cl- in the sample reacts with the Ag + in the electrolyte, and the amount of electricity consumed by the electro-generated Ag + can be calculated. According to Faraday's law, content. Scope of application: It is used to measure the salt content of crude oil and its products, and can be used for the determination of salt content in heavy oil, residual oil, refinery and oilfield, various industrial water and discharged water, and can also be used for the measurement of inorganic chloride in the above samples . Meet the standard: in line with SY / T 0536 and other standards. Features: 1Windows operating platform, man-machine dialogue, easy to operate. 2 screen display parameters, measurement peak type and measurement results, and can store or print. 3 electrolytic cell using a special ceramic sand core, instead of the previous yin and yang membrane, measurement sensitivity increased. 4 results more stable, accurate, repeatable. Technical Parameters: Measuring range: Salt content: 0.2 ~ 10000mgNaCl / L Inorganic chloride: 0.1ppm ~ Percentage measurement accuracy: <3mg / L, r <0.3mg / L 3mg / L ~ 10mg / L, r≤1.2mg / L > 10mg / L, the average of 10% Sampling volume: 1g ± 0.2g Titration method: Coulometric titration Determination of time: ≤ 5 minutes / sample (excluding sample processing) Power: AC220V ± 22V, 50Hz ± 0.5Hz Instrument completeness: host (amplifier), blender, centrifuge, mixer, water bath, computer (including operating software), printers and so on.
Overview: The instrument adopts the principle of microcoulomb titration: the sample to be measured enters the salt electrolysis cell, the Cl- in the sample reacts with the Ag + in the electrolyte, and the amount of electricity consumed by the electro-generated Ag + can be calculated. According to Faraday's law, content. Scope of application: It is used to measure the salt content of crude oil and its products, and can be used for the determination of salt content in heavy oil, residual oil, refinery and oilfield, various industrial water and discharged water, and can also be used for the measurement of inorganic chloride in the above samples . Meet the standard: in line with SY / T 0536 and other standards.
