Introduction This instrument adopts the membrane filtration method, the built-in pump directly to the suction filter way, achieve the goal of bacteria to intercept, and equipped with a 50 mm microporous membrane filter and filter (ZW - 3 b), open mode, reduce test cost, improve the inspection speed, its characteristic: USES the design of "combined", filter samples do not need additional vacuum pump and the buffer bottle, reduce the laboratory instruments, laboratory cleanliness.Advantage: a sample a variety of microbial intercept can simultaneously, and can be multiple samples simultaneously, can save a lot of time. Features The inject incubators in microbial limit test samples, through the tester with the built-in pump negative pressure suction filter, will test samples in microbial intercept on the membrane filter, using the membrane device to take out the membrane filter, transferred to the configured on the solid medium, face up, appressed.Forms a closed the cultivation of the box cover, into corresponding thermostatic cultivation in the box, and counting. Technical parameters Power source: AC220V / 50 hz Power: 60 w Vacuum degree: 100 kpa A single filter traffic: > 100 ml/min (50 mm 0.45 mu m mixed fiber membrane water)
Introduction This instrument adopts the membrane filtration method, the built-in pump directly to the suction filter way, achieve the goal of bacteria to intercept, and equipped with a 50 mm microporous membrane filter and filter (ZW - 3 b), open mode, reduce test cost, improve the inspection speed, its characteristic: USES the design of "combined", filter samples do not need additional vacuum pump and the buffer bottle, reduce the laboratory instruments, laboratory cleanliness.Advantage: a sample a variety of microbial intercept can simultaneously, and can be multiple samples simultaneously, can save a lot of time.
