Brief introduction: 1. The circuit board of the anesthesia machine is made of NASA materials and approved by the us FDA for its safety; 2. The circuit's blocking system effectively prevents leakage and misconnection, and prevents the operator from inhaling anesthetics for a long time or by mistake; 3. The precise design of CO2 absorption tank is characterized by the lowest amount of sodium carbonate and the most absorbed exhaust gas; 4. F-circuit design is designed to maintain the temperature and humidity of the gas during inhalation and exhalation; 5. Different sizes and high quality anesthesia masks are made of polycarbonate, which is more durable and not easy to break. Product features: 1. The volatile tank of the animal anesthesia machine is designed and produced by a professional anesthesia machine factory with excellent quality and extensive use. The product has passed CE and ISO certification. 2. A set of equipment supports the complete open loop and closed loop anesthesia design and provides independent access for both; 3. Provide a convenient Fresh gas outlet for the open loop; 4. Provide independent Inhalation and Exhalation of the Inhalation of air inlet and outlet of the closed loop; 5. One set of pipelines necessary for open loop and closed loop of zs-mv anesthesia for animals; 6. Special Pop off valves are provided. On the one hand, they are connected with the exhaust recovery system; on the other hand, they provide continuous 2cmH2O negative pressure for the rebreathing air bag. 7. Provide another respiratory airbag for the closed loop and continuous negative pressure by the pop-off valve; 8. Provide accurate oxygen flow meter, display range: 0.2 to 4LPM; 9. Double flow meter can be equipped as required, and laughing gas (N2O), nitrogen (N2), carbon dioxide gas (CO2) can be selected. 10. The capacity of the absorber tank is not less than 900cc; 11. Using the original 100 series or TECH3 poured isoflurane anesthesia volatile tank produced by the factory, the output accuracy shall not be less than 0.5%; The capacity is not less than 250ml 12. Pressure measuring range: 0-60cm H20; 13. Provide oxygen bypass switch to allow direct oxygen conduction in animal pretreatment, instrument testing or any emergency; Ensure smooth operation and animal safety; 14. It is made of hard aluminum and is treated with surface abrasion, which makes it easier to scrub and disinfect. 15. When the flow rate is set to 1L, the concentration can reach 93%, which fully satisfies the oxygen content in the anesthesia process of small animals. 16, 5 "large touch screen, more clear to see, convenient to use, higher class, more conducive to animal experiments; 17. Ultra-quiet design, reduce noise, front noise 43db (A); 18. 48H ultra-long time, the timing key is set within the range of 10 minutes to 48 hours, and the oxygen source will be closed automatically after the set time, which is more conducive to observation of animal experiments and safer. 19. Intelligent monitoring and automatic alarm reminder, regular intelligent monitoring and fault alarm, remote bluetooth operation function, and prompt the cause of failure.
Brief introduction: 1. The circuit board of the anesthesia machine is made of NASA materials and approved by the us FDA for its safety; 2. The circuit's blocking system effectively prevents leakage and misconnection, and prevents the operator from inhaling anesthetics for a long time or by mistake; 3. The precise design of CO2 absorption tank is characterized by the lowest amount of sodium carbonate and the most absorbed exhaust gas; 4. F-circuit design is designed to maintain the temperature and humidity of the gas during inhalation and exhalation; 5. Different sizes and high quality anesthesia masks are made of polycarbonate, which is more durable and not easy to break.
