ZR-5409 type multi-parameter dynamic gas calibration device
Introduction: ZR-5409 multi-parameter dynamic gas calibration device, based on the principle of proportional dilution, accurately dilutes the standard gas and diluent gas through the mass flow meter controller, and is used for the calibration of ambient air gas analyzers and stationary pollution waste gas monitoring analyzers . It is widely used in metrological verification, environmental monitoring, analytical instrument production and other units. This dynamic gas calibration device has a built-in ozone generator and an ozone photometer, which can dynamically calibrate the ozone analysis instrument. Features: 1. Quartz gas phase titration chamber, multi-calibration gas interface; 2. Built-in ozone generator and ozone photometer, which can dynamically generate ozone standard gas; 3. Continuous self-inspection with alarm function, timely detection of instrument failures and feedback of alarm information; 4. Built-in high-precision mass flow controller to ensure accurate calibration gas ratio; 5. The digital state outputs the working parameters of the instrument, and the measurement results are simple and easy to understand; 6. Adaptive signal filtering technology optimizes the response time, the response time is less than 180 seconds; 7. Large dilution ratio, high-concentration standard gas can be accurately diluted at ppb level; 8. Large touch display screen, sensitive to touch, rich interface display data, easy to operate; 9. Large-capacity memory, automatic storage of historical data. Technical parameter: Flow range: Calibration gas: 0~100 SCCM Diluent gas: 0~10 SLPM Calibration gas: SO2, NO, NO2, CO, O3, etc. (can be expanded to other gases such as H2S, CO2, etc.) Instrument size: (length 178 × width 432 × height 609) mm Instrument weight: 16.5kg
Introduction: ZR-5409 multi-parameter dynamic gas calibration device, based on the principle of proportional dilution, accurately dilutes the standard gas and diluent gas through the mass flow meter controller, and is used for the calibration of ambient air gas analyzers and stationary pollution waste gas monitoring analyzers . It is widely used in metrological verification, environmental monitoring, analytical instrument production and other units. This dynamic gas calibration device has a built-in ozone generator and an ozone photometer, which can dynamically calibrate the ozone analysis instrument.
