ZP-15A rotary tablet press Introduction: ZP-15A rotary tablet press is used to make granular raw materials into tablets of various shapes. It is suitable for pressing large tablets: chicken essence block, washing block, watercolor powder, art powder, fertilizer block, isatis root block, etc. In addition to pressing circular pieces, this machine can also press irregular pieces, special pieces, double-layer pieces, circular pieces, etc., which can be customized according to your requirements. When running simultaneously, the noise is low, the pressure is high, and the machine stops due to overpressure to avoid damage. characteristic: 1. The speed is variable frequency speed regulation, which can be adjusted arbitrarily. 2. The machine can be tested and adjusted without stopping the machine. 3. All controllers and operating components are arranged reasonably and easy to operate. 4. High pressure, smooth rotation, stable performance, safe and accurate, suitable for pressing various large tablets and difficult to form tablets. Technical parameters: Impulse modulus (payment): 15 Maximum compression pressure (kn): 150 Maximum compression diameter (mm): 40 Maximum filling depth (mm): 18 Maximum tablet thickness (mm): 8-15 Rotary speed (RPM): 10-25 Diameter of upper and lower punch rods (mm): 42mm Upward punch length (mm): 175mm Lower punch rod length (mm): 180mm Medium mold diameter (mm): 52mm Maximum output (pcs/h): 22500 Electric motor power (kw): 7.5kw Dimensions (mm): 900 * 800 * 1640 Host weight (kg): 1500
Introduction: ZP-15A rotary tablet press is used to make granular raw materials into tablets of various shapes. It is suitable for pressing large tablets: chicken essence block, washing block, watercolor powder, art powder, fertilizer block, isatis root block, etc. In addition to pressing circular pieces, this machine can also press irregular pieces, special pieces, double-layer pieces, circular pieces, etc., which can be customized according to your requirements. When running simultaneously, the noise is low, the pressure is high, and the machine stops due to overpressure to avoid damage.
