Introduction: The 5KW FM Stereo Transmitter (Hot Plug) is a high performance broadcast stereo stereo broadcast transmitter for professional broadcast radio coverage. Considering the high reliability of the transmitter, the transmitter is designed with redundancy in key parts in order to achieve long-term stable operation of the transmitter. Thanks to the hot-swappable construction, the components of the transmitter can be repaired and restored without downtime. Features: 1. Large power margin: It is efficiently synthesized by four 1.5KW hot-swap modules, and four 2500VA hot-swap switching power supplies are connected to each other. 2. Output power is stable: Intelligent automatic power control technology (AGC) is adopted to ensure that the output power does not change with the startup time and ambient temperature, and the power stability is controlled within 10W. 3. Dual exciter configuration (optional): Intelligent automatic switching with dual exciters can further improve the reliability of the whole machine. 4. Digital FM exciter: It adopts full digital CD-level FM exciter to directly receive digital audio signal (AES/EBU), and the listening effect is close to CD sound quality. 5. User-friendly interface: It adopts 8-inch true color touch LCD screen to display various parameters in the machine in real time, without any training, it can be operated at the screen prompt. 6. Complete protection functions: over power protection, over-reflection protection, over-temperature protection, over-voltage protection and over-current protection; and intelligently adjust output power when some power amplifier modules are faulty, maintaining maximum safe power broadcast, It also ensures that the fault will not expand. 7. Real hot plug function: In any case, the power amplifier module and power module can be plugged and unplugged without stopping the machine, and the transmitter can be repaired and restored without stopping the machine. 8. Timing automatic adjustment of output power: Through field setting, the transmitter automatically adjusts the output power at different times of the day, which brings convenience to the economic operation of the radio. 9. Advanced remote telemetry interface: Access any parameters inside the transmitter via RS232/RS485 interface or TCP/IP network interface. Technical Parameters: 1. RF frequency range 87MHz~108MHz Step 10kHz (other frequencies can be customized) 2. Output power 0~5000W Continuously adjustable 3. Output power tolerance deviation <±10% 4. Output power stability <±3% 5. Output impedance 50Ω 6. RF output connector IF70 flange or 40 hard feed 7. Within the residual wave < -70dB 8. Higher harmonics < -68dB 9. Parasitic amplitude modulation < -50dB 10. Carrier frequency tolerance ±200Hz 11. Analog audio input -12dBm ~ +8dBm 12. Audio Level Gain -15dB~+15dB Step 0.1dB 13. Analog audio input impedance 600Ω balance 14. AES/EBU input impedance 110Ω balance 15. AES/EBU input level 0.2~10Vpp 16. AES/EBU sampling rate 30kHz~96kHz 17. SCA Input Unbalance (optional) BNC type connector 18. Audio pre-emphasis 0μs, 50μs, 75μs 19. Frequency response ±0.1dB 30Hz~15000Hz 20. Left and right channel level difference <0.1dB (100% modulation) 21. Stereo resolution ≥50dB 30Hz~15000Hz 22. Stereo signal to noise ratio ≥70dB 1KHz, 100% modulation 23. Distortion <0.1% 30Hz~15000Hz 24. Heat dissipation method Forced convection 25. Temperature range -5°C~+45°C 26. Chassis Standard 19" Width (777mm) x Height (1523mm) x Depth (950mm) 27. Machine weight 400kg
Introduction: The 5KW FM Stereo Transmitter (Hot Plug) is a high performance broadcast stereo stereo broadcast transmitter for professional broadcast radio coverage. Considering the high reliability of the transmitter, the transmitter is designed with redundancy in key parts in order to achieve long-term stable operation of the transmitter. Thanks to the hot-swappable construction, the components of the transmitter can be repaired and restored without downtime.