ZDJ-3S full automatic Carle Fisher moisture meter Brief introduction:
Automatic system of trace moisture meter is jointly with tsinghua university by pulse width modulation control speed; With the dynamic compensation method with pid and automatic control temperature; Real-time display temperature and rotational speed level; External heating device and semiconductor refrigeration device, satisfy the special requirement for temperature experiment. Features:
1. Chinese show titration process, can be carried out in both Chinese and English input and output.
2. Titration of totally enclosed design, can automatically change the solvent, avoid chemical reagent and the contact of human body.
3. According to the experimental conditions, can set the "automatic" or "manual" drift value background subtraction, ensure that the analysis results more accurate.
4. The titration results according to GMP/GLP requirements format output, and the storage of titration results were analyzed.
5. Random equipped with titration monitoring software can monitor all the titration process, and through the software version to upgrade.
6. Equipped with corresponding accessories never stop titration can be performed. Technical parameters:
Polarization voltage output: 0 ~ 2550 mv
Polarization step length: 10 mv
Polarization output error: < plus or minus 3%
Polarization voltage maximum output current: 5 ma
The most routine: 0 ~ 200 mu A
Resolution: 0.01 mu A
Effective accuracy is better than that: + / - 0.1 mu A
Minimum feed liquid: 0.625 mu l
Moisture measuring range: 10 PPM ~ 100%
Results units: mg; %; PPM
Determination of time (depending on the degree of titration) : 30 seconds to a few minutes
Method of storage capacity: 100 titration results peripheral interface.
Peripheral interface: printer interface: RS232C interface
Brief introduction:
Automatic system of trace moisture meter is jointly with tsinghua university by pulse width modulation control speed; With the dynamic compensation method with pid and automatic control temperature; Real-time display temperature and rotational speed level; External heating device and semiconductor refrigeration device, satisfy the special requirement for temperature experiment.
