Introduction: The fully transparent sapphire reactor is a new laboratory instrument developed in 2017. The temperature is: jacket heating or cooling, temperature range: -20 °C-200 °C. Stirring form: magnetic stirring (100ml, 150ml can be magnetically coupled mechanical stirring) Material: sapphire cylinder, withstand voltage ≤10mpa 1, Germany wika pressure gauge - dial directly 60mm, measuring range 0-16mpa, material 316ss, accurate display, not easy to damage. 2, intake and outlet right angle valve ---- 316L material, anodized aluminum handle, used for: kettle body ventilation, deflation, sampling 3, the United States fitok proportional bleed valve ----- overpressure automatic pressure relief, can be used multiple times, you can manually adjust the pressure relief pressure. 4, protective safety door --- acrylic material, thickness 15mm, safety protection, to prevent solution splashing, to ensure personal safety. 5, the material starts: Sapphire crystal, zui hard oxide crystal. It has a series of excellent physical and chemical properties such as high strength, high hardness, high temperature resistance, abrasion resistance, corrosion resistance, good light transmission performance and excellent electrical insulation performance. 6, full transparency, good light transmission, high pressure visible, the whole process can be observed 7, the use of a wide temperature range! The jacket is temperature-controlled, which can be used for both high temperature and low temperature reaction. 8, the configuration of the unloading valve, overpressure automatic pressure relief, safe and reliable! Imported sealing ring seal, good air tightness! It is equipped with an air outlet valve, which can be ventilated, vented, and sampled online. Technical Parameters: Volume: 10ml, 25ml, 50ml, 100ml, 150ml Operating temperature: jacket heating or cooling, temperature range: -20 ° C -200 ° C Stirring form: magnetic stirring (100ml, 150ml can be magnetically coupled mechanical stirring) Material: sapphire cylinder Withstand voltage ≤10mpa
Introduction: The fully transparent sapphire reactor is a new laboratory instrument developed in 2017. The temperature is: jacket heating or cooling, temperature range: -20 °C-200 °C. Stirring form: magnetic stirring (100ml, 150ml can be magnetically coupled mechanical stirring) Material: sapphire cylinder, withstand voltage ≤10mpa 1, Germany wika pressure gauge - dial directly 60mm, measuring range 0-16mpa, material 316ss, accurate display, not easy to damage. 2, intake and outlet right angle valve ---- 316L material, anodized aluminum handle, used for: kettle body ventilation, deflation, sampling 3, the United States fitok proportional bleed valve ----- overpressure automatic pressure relief, can be used multiple times, you can manually adjust the pressure relief pressure. 4, protective safety door --- acrylic material, thickness 15mm, safety protection, to prevent solution splashing, to ensure personal safety. 5, the material starts: Sapphire crystal, zui hard oxide crystal. It has a series of excellent physical and chemical properties such as high strength, high hardness, high temperature resistance, abrasion resistance, corrosion resistance, good light transmission performance and excellent electrical insulation performance. 6, full transparency, good light transmission, high pressure visible, the whole process can be observed 7, the use of a wide temperature range! The jacket is temperature-controlled, which can be used for both high temperature and low temperature reaction. 8, the configuration of the unloading valve, overpressure automatic pressure relief, safe and reliable! Imported sealing ring seal, good air tightness! It is equipped with an air outlet valve, which can be ventilated, vented, and sampled online.
