YPM-8203-02-0250-F-L 250W Thermopile Power Detector Introduction: YPM-8203-03 thermopile power detector, suitable for absolute power measurement of 0.2W-250W lasers. Two data collection methods are available for selection: DB15 connected to instrument display and Bluetooth/USB direct connection to computer. YPM-8203-03-F-L adopts DB15 interface and needs to be connected to a power meter instrument for use. It can be used for data reading, data storage, and power monitoring on the instrument. In addition, a USB communication interface is reserved on the instrument, which can expand the ability to upload the data collected from the detector to the optical power measurement software on the PC for online data collection and analysis. YPM-8203-03-F-B uses Bluetooth or USB communication, without the need for instruments, and can be directly connected to a computer through Bluetooth or USB for data collection. The computer needs to install optical power measurement software, which can achieve real-time data collection, data analysis, and power monitoring functions. In addition, a multi-channel power acquisition system can be conveniently formed through USB connection, and data from multiple detectors can be synchronously collected and displayed through the USB Hub. YPM-8203-03 thermopile power detector, suitable for absolute power measurement of 0.2W-250W lasers. DB15 version connects to YPM-8201 series optical power meter instruments for data reading and operation; The Bluetooth version has a built-in Bluetooth/USB data module that can communicate with computers or mobile devices through Bluetooth or USB. At the same time, the Bluetooth/USB data module also has output ports, external triggering functions, and PWM functions, making it convenient to form a real-time feedback closed-loop system between the detector and the laser. Application: Measurement of common lasers such as CW Nd: YAG laser, CO2 laser, YAG, as well as measurement of holmium laser, high-power laser diode, and excimer laser. Technical parameters: Model: YPM-8203-02-0250-F-L Data collection method: DB15 connected to instrument display Material: thermoelectric stack Wavelength range: 0.19-20um Maximum average power density: 10kW/cm2 (1064nm/10W/CW) 3.2kW/cm2 (10640nm/10W/CW) Maximum energy density: 5J/cm2 (1064nm, 360us, 5Hz) 1J/cm2 (1064nm, 7ns, 10Hz) 0.6J/cm2 (532nm, 7ns, 10Hz) 0.3J/cm2 (266nm, 7ns, 10Hz) Maximum average power (typical value): 200W (continuous); 250W (<1 minute) Power range: 0.2-250W Calibration uncertainty: ± 3% @ 1064nm, 10640nm ± 5% @ 190-20000 nm Linearity: ± 2% Uniformity: ± 2% Response time: 3s Effective detection diameter: 25mm Cooling: air cooling Size (L * W * D): 70 mm × 70 mm × 70 mm
Introduction: YPM-8203-03 thermopile power detector, suitable for absolute power measurement of 0.2W-250W lasers. Two data collection methods are available for selection: DB15 connected to instrument display and Bluetooth/USB direct connection to computer. YPM-8203-03-F-L adopts DB15 interface and needs to be connected to a power meter instrument for use. It can be used for data reading, data storage, and power monitoring on the instrument. In addition, a USB communication interface is reserved on the instrument, which can expand the ability to upload the data collected from the detector to the optical power measurement software on the PC for online data collection and analysis. YPM-8203-03-F-B uses Bluetooth or USB communication, without the need for instruments, and can be directly connected to a computer through Bluetooth or USB for data collection. The computer needs to install optical power measurement software, which can achieve real-time data collection, data analysis, and power monitoring functions. In addition, a multi-channel power acquisition system can be conveniently formed through USB connection, and data from multiple detectors can be synchronously collected and displayed through the USB Hub. YPM-8203-03 thermopile power detector, suitable for absolute power measurement of 0.2W-250W lasers. DB15 version connects to YPM-8201 series optical power meter instruments for data reading and operation; The Bluetooth version has a built-in Bluetooth/USB data module that can communicate with computers or mobile devices through Bluetooth or USB. At the same time, the Bluetooth/USB data module also has output ports, external triggering functions, and PWM functions, making it convenient to form a real-time feedback closed-loop system between the detector and the laser. Application: Measurement of common lasers such as CW Nd: YAG laser, CO2 laser, YAG, as well as measurement of holmium laser, high-power laser diode, and excimer laser.
