YLS small animal nebulization drug delivery device
Introduction: The working principle of the atomization device we use now is based on the ultrasonic vibration plate as the pump, and the liquid on one side of the vibration plate is vibrated and ejected from the other side through the horn-shaped micro-holes. The size of the micropores determines the fineness of the droplets. During the spraying process, the liquid takes away the heat generated by vibration, so it does not produce high temperature and high pressure (it can run without water), thus overcoming the original ultrasonic atomization. defect. We made full use of this advantage of the device and developed a small animal atomizing drug delivery device. Features: 1. The atomized particles are fine (1-5μm accounted for 80%), and the particles can enter the alveoli smoothly. 2. Able to calibrate the atomization volume in real time after using different liquids or changing the atomization head. 3. It can use boxes of different volumes or carry out nasal inhalation and administration to a separate animal. 4. It is convenient to add medicine, clean and replace the animal container and atomization head. 5 There is a filter exhaust system, manual counting of cough sounds, and first cough time recording (latency period). 6. It adopts dual-channel design, touch-screen LCD display, and a good man-machine dialogue interface, which can read data online with a computer, and the operation is simple and convenient. Technical index Fineness of atomized particles: 1-5μm (80%) Atomization head size: Φ26×30mm Animal box: Packing box size length width height Large size: 10L 305×260×170mm (optional) Medium: 8L 285×240×160mm (optional) Small: 5L 255×210×135mm (standard configuration) Stack six layers of 5mm activated carbon filter cotton in the filter box The maximum dose of the first atomization: 1ml The amount of atomized agent during calibration: 0.1—1ml, the step size is 0.1ml (the larger the amount of atomized agent, the more accurate) Test time setting: 0—240 minutes, set the step length to 1 minute (0 means no time is set) Spray volume setting: 0.1-60ml, set the step length to 0.1ml Atomization speed setting: 1-10 files, set the step length to 1 Exhaust delay setting: 0-60 seconds, set the step length to 1 second Number of channels: 2 (alternate spare) Thermal printing is divided into manual and automatic printing methods LCD touch screen operation, zero noise Power input: AC 100V—240V 1.5A 50/60HZ Host size: 280×180×125mm Weight: 2kg
Introduction: The working principle of the atomization device we use now is based on the ultrasonic vibration plate as the pump, and the liquid on one side of the vibration plate is vibrated and ejected from the other side through the horn-shaped micro-holes. The size of the micropores determines the fineness of the droplets. During the spraying process, the liquid takes away the heat generated by vibration, so it does not produce high temperature and high pressure (it can run without water), thus overcoming the original ultrasonic atomization. defect. We made full use of this advantage of the device and developed a small animal atomizing drug delivery device.
