Features: 1. The structure is stable and reliable; 2. The surface of the work surface is precisely ground, the finishing marks are completely removed, and the shape is smooth and high precision; 3. Solid damping vibration isolation and pneumatic damping vibration isolation; 4. The countertop is made of high-quality steel, honeycomb core, and strong steel deformation. 5. Special specifications, special materials are received and ordered. Technical Parameters: Flatness: ≤0.10mm/m2; Surface dense texture, roughness: ≤1.6um; The use of two-layer diaphragm airbag, good vibration isolation performance, natural frequency vertical direction: <1.5HZ, horizontal direction: <2HZ; Amplitude: ≤1.2um; Repeat positioning accuracy: ±0.05mm; Table thickness: 8mm, screw hole M6, spacing 25mm; Imported high quality silent air compressor air source, low noise (<65db). Adjustment and use: 1. Wipe the work surface with a low-fiber soft cloth before commissioning; 2. Adjust the level to the middle of the platform; 3. Check if the silent air compressor is good (please read the air compressor manual for details); 4. Turn on the silent air compressor power supply (220V), turn on the power switch for trial operation; 5. Connect the air compressor outlet pipe to the platform intake port, and turn on the power switch; 6. Adjust the adjusting seat screw and adjust the height of the valve joint bolt to make the horizontal bubble move to the central part and lock the nut; 7. Press down on any part of the platform and release the horizontal bubble to the initial state after release. 8. The platform should be placed on any item, please be careful to avoid relative friction, so as not to damage the accuracy of the working platform; 9. When the product is not used for a long time, please turn off the air compressor power supply and turn off the power plug to avoid creep of the vibration isolation diaphragm; 10. When your work does not require platform vibration isolation, you only need to turn off the silent air compressor power supply and open the exhaust valve.
Features: 1. The structure is stable and reliable; 2. The surface of the work surface is precisely ground, the finishing marks are completely removed, and the shape is smooth and high precision; 3. Solid damping vibration isolation and pneumatic damping vibration isolation; 4. The countertop is made of high-quality steel, honeycomb core, and strong steel deformation. 5. Special specifications, special materials are received and ordered.
