Brief introduction: This product is made of high quality austenitic stainless steel, with high vacuum and multi-layer adiabatic structure, good adiabatic performance, natural loss of liquid nitrogen and self-pressurizing device inside the container. It makes use of a small amount of liquid nitrogen gasification to generate pressure in the container so that the container can discharge liquid nitrogen. Features: The surface of this product has been polished, exquisite and bright, convenient and flexible in operation. It is suitable for filling liquid nitrogen into biological container of liquid nitrogen and other cryogenic container and other instruments. The maximum working pressure of this product is 0.09MPa, which is only allowed to be filled with liquid nitrogen and liquid argon, and is not allowed to be filled with flammable, explosive and toxic low-temperature gases such as liquid oxygen and liquid hydrogen. System composition: The upper part of the container is installed with infusion valve, vent and pressure reducing valve, double safety valve (with the highest safety), pressure valve, pressure gauge, liquid nitrogen dedicated infusion tube and other parts to move the caster silently Technical reference: Product model: YDZ-50 Effective volume (L) : 50 Working pressure: 0.09MPa Diameter (mm) : 455 Total height (mm) : 1000 Air weight (kg) : 505 Full weight (kg) : 90 Infusion volume (L/MIN): greater than or equal to 4 Daily evaporation rate of liquid nitrogen (%)
Brief introduction: This product is made of high quality austenitic stainless steel, with high vacuum and multi-layer adiabatic structure, good adiabatic performance, natural loss of liquid nitrogen and self-pressurizing device inside the container. It makes use of a small amount of liquid nitrogen gasification to generate pressure in the container so that the container can discharge liquid nitrogen.
