Brief introduction: This product is mainly used for inspection rubber bearing, shock absorber class finished the mechanical properties of rubber bearing products are compressive strength, compressive pressure modulus, shear bonding performance, and aging resistance, coefficient of friction, Angle test, etc. And can do bridge plate rubber support axial and radial deformation under load test detection. Test according to the transportation sector JT/T mathematical calculation formula of the 4-2004, can also be carried out in accordance with the rubber class standard test method for testing. Technical indicators: Yj models: YAW - 5000 Accuracy levels: level 1 Oil source flow (L/min) : 17.5 The machine overall dimensions (length x width x height in mm) : 5100 * 1250 * 1250 Oil source dimension (length x width x height in mm) : 1750 * 850 * 850 The weight (kg) : 14000 Total power (kW) : 13 Biggest test (kN) : 5000 Test force relative error value: plus or minus 1% The test force measuring range: 1%, 100% FS 1/450000 of the test force resolution: maximum test force The distance between the columns (mm) : 795 x 495 The distance between the upper and lower platen (mm) : 0-1000 Beam movement speed (mm/min) : 300 Platen size (mm) : 710 x 710 Piston stroke (mm) : 80 The deformation measurement resolution (mm) : 0.001 Total power (kW) : 2.2 The biggest battle (kN) : 300 Test force relative error value: within + / - 1 The test force measuring range: 1%, 100% FS Displacement measurement resolution (mm) : 0.01 Power (kW) : 0.25
Brief introduction: This product is mainly used for inspection rubber bearing, shock absorber class finished the mechanical properties of rubber bearing products are compressive strength, compressive pressure modulus, shear bonding performance, and aging resistance, coefficient of friction, Angle test, etc. And can do bridge plate rubber support axial and radial deformation under load test detection. Test according to the transportation sector JT/T mathematical calculation formula of the 4-2004, can also be carried out in accordance with the rubber class standard test method for testing.
