Brief introduction: YAW - 300/5 computer control pressure testing machine (double location model) is used for cement, mortar compressive and bending test. Applicable to the construction, building materials, road and bridge, quality supervision, in areas such as mechanical property test. The machine USES the first domestic developed servo oil source load technology, load control stable and accurate. Choose Panasonic servo system complete sets of servo drives and motors, the machine running noise is greatly reduced to less than 50 db, even better than that of low noise electronic universal testing machine. In the test condition of the technology to achieve the servo system is not consumed power, than traditional work constant pressure oil source system of power saving 65-75%, not only reduces the energy consumption, also suitable for low carbon economy development requirements of The Times. This model accord with GB/T 17671, GB/T 17671, GB/T 2611 standard requirements, etc. Features: 1. Stainless steel mesa, convenient using and maintenance of the user. 2. The servo oil source control, control accuracy, low noise, small energy consumption. 3. The servo oil source in the test status is not consumed power, not only saving energy, and the oil temperature heat is small. 4. Can be set constant torque speed test. 5. Test the force function. 6. Open test method for setting domestic initiation; 7. At first test control flow design; 8. At first efficient level 3 operation test data processing model; 9. Support the test data statistical calculations (mean, standard deviation, coefficient of variation). 10. The results can be stored and can be read at any time, refer to the test results. 11. The test data and curve to analysis, curve to any local amplification. Technical indicators: Product model: YAW - 300/5 Maximum force test: 300 kn The test force measuring range: 2% ~ 100% Test force accuracy value: plus or minus 1% Test force resolution: + 500000 yards, not all the step, resolution remains the same Test force rate adjustment range: 0.05% ~ 2.5% f.s/s Test force rate relative error: rate < 0.3% f.s/s: + / - 5% rate of 0.3% or higher f.s/s: plus or minus 2% Piston stroke: 100 mm Upper and lower clamp the maximum distance: 245 mm On the pressure plate size: 108 mm Φ Press table size: 108 mm Φ Power: 1.6 kW/AC220V / 50 hz Weight: 800 kg
Brief introduction: YAW - 300/5 computer control pressure testing machine (double location model) is used for cement, mortar compressive and bending test. Applicable to the construction, building materials, road and bridge, quality supervision, in areas such as mechanical property test. The machine USES the first domestic developed servo oil source load technology, load control stable and accurate. Choose Panasonic servo system complete sets of servo drives and motors, the machine running noise is greatly reduced to less than 50 db,
