Introduction: Uses: Used in dyeing and printing plant long car, jig dye production industry and the design of the sample pad dyeing trial use, and for cotton, T / C and other fabrics. Used to determine the fiber length of wool tops. Applicable standards: GB / T6501-65; ISO920-1976; FJ533-85. structure: There are 17 card-shaped grooved card slot, mounted on the next comb with the next, the distance between the three combs 3.75mm fiber. Under the combs The carriage is supported by the carriage, the carriage is moved by pulling the carriage, and the lower comb plate supported thereon is also dropped one by one. With the fork plate, all the lower comb plates can be lifted, and then the carriage can be pushed The original working position, on the comb can be placed in the middle of two combs in the middle of the comb in order to reduce the comb spacing, in order to better grip the staple fiber. Two analyzers installed in the same floor, the middle of a bit of screws, you can freely rotate. working principle: Using a set of steel pin combs the sample is tidied into one end of the cotton bundle, and then from long to short will cotton The fibers are divided into groups according to a certain length, weighed the weight of each group separately, so as to obtain various indexes of the length. Specifications: Model: Y131 Comb spacing: 10mm Number of combs: comb 5 Lower comb 31 Overall dimensions: 390 × 295 × 292mm Weight: 10kg
Introduction: Uses: Used in dyeing and printing plant long car, jig dye production industry and the design of the sample pad dyeing trial use, and for cotton, T / C and other fabrics. Used to determine the fiber length of wool tops. Applicable standards: GB / T6501-65; ISO920-1976; FJ533-85.
