Brief introduction: The standard laminar chip is a glass microfluidic chip applied to the molecular diffusion between two phase liquid contact and parallel laminar flow. It can observe the fluid flow in the chip channel under the micron size. Our company can provide chips with different channel depth and width according to customer demand. This chip is applicable to the wh-cf-01 horizontal clamping device developed by our company. Y type laminar flow: port 150/200 the width of the depth of 50 microns laminar flow length 20/30 mm Angle of 30 ° / 45 °. Advantages: The channel surface is smooth; Wide range of acceptable temperature and pressure; Good chemical compatibility; Easy to connect or disassemble; Good light transmittance; Small size, light weight and strong portability. Specifications: Quantity imported: 2 Export quantity: 1 Surface modification: hydrophilic and hydrophobic Channel depth: 10~150 nm Length of straight path: 15 mm Pressure: 10 bar Chip size: 22.5 mm x 15 mm x 4mm Operating temperature: -15-150 Material: glass Manufacturing process: HF etching, hot pressing bonding
