Introduction: The device can be used for continuous pressure, high pressure and high temperature continuous reaction tests, and is suitable for research and evaluation of catalyst performance and screening in universities and research institutes. Application: It can be widely used in petrochemical, chemical chemistry, scientific research and teaching. It can be used in some conventional parameter determinations in catalyst research and improvement: reaction temperature, reaction pressure, and feed flow rate. The role of the catalyst in the hydrogenation reaction can be tested. It can be used for rough selection, selection and activity testing of catalysts. Test the expiration date of the catalyst. The device has extremely wide operating conditions and is highly versatile; The device is a vertical frame structure, and is designed with a liquid vaporization furnace, a reaction heating furnace, a reactor fixed bed, and a three-stage temperature control furnace. After the gas raw material is depressurized, the flow rate is controlled by the mass flow meter to enter the reactor, and the liquid raw material is metered by the metering pump, then enters the vaporization furnace for vaporization, and then enters the reactor for reaction. The reaction product was analyzed as a full-component online and the remaining gas was vented. The device can carry out reaction mechanism and reaction kinetics research, reaction condition exploration, catalyst screening, evaluation and the like. Features: 1. The shape of the device can be designed into an open frame and a desktop type according to requirements; 2. It can realize the combination of computer automation and manual dual mode control for easy operation; 3. Instruments, pumps and valve parts adopt domestic and foreign famous brand products to ensure the reliability and stability of the system; 4. Set up high and low limit interlocking alarms for the reaction conditions to ensure the safe operation of the device; 5. All components are modular in design, strong in versatility, easy to install and maintain; 6. System flow, catalyst loading, feed rate, medium type, operating pressure, etc. can be specially designed according to user requirements. Technical Parameters: Design pressure: 4.0MPa Design temperature: room temperature ~ 600 ° C Gas flow rate: ~80l/min Catalyst loading: ~200ml Material: 316L Valve: domestic Instrument: Domestic Gas booster pump: Sethst compression ratio 10:1 Drive gas source: Jaguar air compressor, 1m3/min Aluminum profile frame, fully enclosed spray panel Overall size: 1350*600*1850mm
Introduction: The device can be used for continuous pressure, high pressure and high temperature continuous reaction tests, and is suitable for research and evaluation of catalyst performance and screening in universities and research institutes. Application: It can be widely used in petrochemical, chemical chemistry, scientific research and teaching. It can be used in some conventional parameter determinations in catalyst research and improvement: reaction temperature, reaction pressure, and feed flow rate. The role of the catalyst in the hydrogenation reaction can be tested. It can be used for rough selection, selection and activity testing of catalysts. Test the expiration date of the catalyst. The device has extremely wide operating conditions and is highly versatile; The device is a vertical frame structure, and is designed with a liquid vaporization furnace, a reaction heating furnace, a reactor fixed bed, and a three-stage temperature control furnace. After the gas raw material is depressurized, the flow rate is controlled by the mass flow meter to enter the reactor, and the liquid raw material is metered by the metering pump, then enters the vaporization furnace for vaporization, and then enters the reactor for reaction. The reaction product was analyzed as a full-component online and the remaining gas was vented. The device can carry out reaction mechanism and reaction kinetics research, reaction condition exploration, catalyst screening, evaluation and the like.
