XTU-A X fluorescence spectrometer Features: 1. Down-illuminated design: Quick and easy positioning of samples of various shapes to meet all testing needs. 2. Non-destructive zoom detection: With manual zoom function, non-destructive testing can be performed on various shaped groove parts, and the groove depth range is 0-90mm. 3. Micro-focusing device: It can test all tiny parts with a minimum detection area of 0.002mm2. 4. High-efficiency receiver: When testing samples below 0.01mm2, stability can be achieved in a few seconds. 5. Precision micro slides: Precision manual moving platform to quickly and accurately locate the samples to be tested. 6. EFP advanced algorithm software: can detect single coating, multi-plating, multi-alloy, even for the same element thickness detection in different layers, including light metal coating, non-metal coating, Dacromet, Nip coating test, including The ratio of Ni to P can also be detected. 7. Collimators and filters: A variety of collimators and filters are electrically switched to meet the needs of various test methods. 8. A new generation of high-voltage power supply and X-ray tube: stable and reliable performance, up to 50W power for higher test efficiency. 9. Efficient cooling system: convection ventilation filter air cooling, the instrument can maintain constant temperature and constant effect even if it is turned on all the time. 10. Protection device: Constant voltage constant current shutter type shutter, with high voltage power supply emergency self-locking function, giving you all-round protection. Technical Parameters: Dimensions: 550mm * 480mm * 470mm (length * width * height) Sample compartment size: 500mm * 360mm * 215mm (length * width * height) Instrument weight: 45KG Power supply: AC 220±5V Maximum power: 330W Ambient temperature: 15 ° C - 30 ° C Relative humidity: ≤70% Measuring element range: CI(17)-U(92) Coating analysis range: various elements and organic matter Analysis software: EFP, can analyze 23 layers of coatings at the same time, 24 elements, different layers with the same elements and organic thickness can also be analyzed Test program addition: 1862 test programs are provided free of charge, and new programs can be edited. Software operation: User-friendly closed software, automatic prompt correction and steps to avoid operation errors X-ray device: Boost emission integrated polymerized W target microfocus enhanced ray tube Receiver: Japan Toshiba proportional counting tube, window area ≥ 150mm2 Ray collimation system: vertical optical path switching device with gold collimator Video observation optical path system: Vertical optical path switching device equipped with 100mm zoom lens Sample reading open mode: Constant voltage constant current shutter shutter Filter: Aluminum, None, Nickel Collimator: ø0.2mm; ø0.5mm; collimator can choose any kind Recent range spot spread: 9% Minimum measurement area: about 0.03mm2 Measuring distance: With distance compensation function, it can change measuring distance, can measure concave and convex shaped samples, zoom distance is 0-30mm (special requirements can be upgraded to 90mm) Sample observation: 1/2.5 color CCD, global shutter, effective pixels: 1280*960, zoom function Focus mode: High sensitivity lens (no need to add other auxiliary sensors), manual focus Magnification: Optical 38-46X, digital magnification 40-200 times Sample stage size: 500mm*360mm Sample placement area: 480mm*320mm*205mm (C-type slotted design, samples can be placed outside the area for special tests) Movement method: manual without rail Electrical parameters: Power: AC 220V 50HZ Power consumption: up to 120W (excluding computer) Cooling system: convection channel filtered air cooling Maintenance upgrade module: software and hardware modularization
Features: 1. Down-illuminated design: Quick and easy positioning of samples of various shapes to meet all testing needs. 2. Non-destructive zoom detection: With manual zoom function, non-destructive testing can be performed on various shaped groove parts, and the groove depth range is 0-90mm. 3. Micro-focusing device: It can test all tiny parts with a minimum detection area of 0.002mm2. 4. High-efficiency receiver: When testing samples below 0.01mm2, stability can be achieved in a few seconds. 5. Precision micro slides: Precision manual moving platform to quickly and accurately locate the samples to be tested. 6. EFP advanced algorithm software: can detect single coating, multi-plating, multi-alloy, even for the same element thickness detection in different layers, including light metal coating, non-metal coating, Dacromet, Nip coating test, including The ratio of Ni to P can also be detected. 7. Collimators and filters: A variety of collimators and filters are electrically switched to meet the needs of various test methods. 8. A new generation of high-voltage power supply and X-ray tube: stable and reliable performance, up to 50W power for higher test efficiency. 9. Efficient cooling system: convection ventilation filter air cooling, the instrument can maintain constant temperature and constant effect even if it is turned on all the time. 10. Protection device: Constant voltage constant current shutter type shutter, with high voltage power supply emergency self-locking function, giving you all-round protection.
