- Model NumberWX-6F-B
- Brand NameJDZDHDYQKJ
- Payment TermsT/T, paypal
Brief introduction:
The huadan brand WX-6F-B six-chain intelligent microbial limit tester manufactured by huadan company conforms to the GB/ t8538-2008 test method for drinking natural mineral water and the experimental standard for bacterial detection, and conforms to the microbial limit test standard of the 2015 edition of the pharmacopoeia. Four samples can be tested at the same time, which can be used for microbial limit test and sterility test of pharmaceutical purified water, water for injection and liquid preparation; Check the total number of bacteria in food and beverage, mineral water and purified water; Check the total number of bacteria in water quality, such as disease control, and detect pathogenic bacteria; Water sample testing of various microorganisms to be tested in chemical industry; Solids suspended in water from environmental monitoring stations and sewage treatment plants were measured.
Performance characteristics:
1. The built-in imported gas-liquid mixing pump can discharge liquid directly without collecting bottles, saving the trouble of frequently inserting and pulling waste liquid bottles;
2. Adopt ultra-fine stainless steel metal powder sintered filter to ensure even interception of microorganisms;
3. Four samples can be filtered at the same time, or one or more of them can be filtered separately;
4, four switches can achieve automatic control, no sample automatically closed, automatically open the sample, no manual open and close
5. The stainless steel housing is polished by the mirror, with smooth and smooth surface and no dead Angle residue, which is convenient for cleaning and disinfection;
6, stainless steel cup built-in laser printing text scale, convenient for the quantitative experiment personnel;
7. The sterilization and disinfection method of the microbial limit tester of this product can be used to sterilize the filter head and the filter cup by wet heat and dry heat, or the flame sterilization gun can be used for direct sterilization, which can complete the sterilization of a single filter head in 3 seconds.
8, the filter head can be quickly removed, gently inserted into the base can be stuck seal, press the base can be ejected
9. The filter cup is equipped with the upper cover of the bacterial filter hole. The instrument can be used for both open filtration and closed filtration.
10. Optional filtration capacity: 100/300/500ml; optional membrane diameter: 35/47/50/60mm
11, is different from the card on the market, such as cumbersome sealing spring clamp, screw, this product USES Germany JinKouJi processing technology, the surface accuracy of 0.005 mm, the surface of the filter head without seal, the researchers can easily buckle on the filtering cup can be completely sealed, filtering and picked up the cup is advisable under filter film analysis, greatly improve the efficiency of experiments.
12. Standard 12 filter cups can be recycled, and our company produces md-36 box type rapid magnetic thermal-photoelectric sterilizer, which can complete the sterilization of the filter head of the filter cup within 5 minutes, so as to truly realize the continuous testing of multiple samples by the laboratory staff
13. The LCD screen can be touched to comprehensively monitor the working parameters of the instrument, and the timing shutdown operation can be realized
14. The vacuum pressure is adjustable, and it is convenient to remove the membrane after filtration
15. Overall length, width and height: 600*320*450MM
16. Weight: 8KG
Technical parameters:
1. Both gas and liquid can be pumped, and the whole is maintenance-free;
2, the working current is small, can be used in any household circuits;
3, ultra-quiet work, working noise 30DB;
4. The power of 40W and 24V is safe dc voltage, which can guarantee the absolute safety of experimental personnel under extreme conditions
5. Discharge rate: 3L/min,
6. Vacuum pressure: 0.08mpa (640mmhg);
