Introduction: The testing machine is mainly used for non-metallic materials such as tensile, compressive, bending normal performance at room temperature and creep and other conventional performance tests; if equipped with the corresponding accessories, it can also be used for performance testing of other test methods, such as cutting , stripping, tearing, etc. Applicable test method standards: 1, GB11546.1-2008 "Determination of plastic creep properties - Part 1: Tensile creep" 2, GB/T 15048-94 "rigid foam compression creep test method", 3 GB/T 20672-2006 "Determination of compressive creep of rigid foams under specified load and temperature conditions". 4, GB/T 1040.1-2006 "Determination of tensile properties of plastics, Part 1"; 5, GB/T1041 -92 "Test method for compression properties of plastics"; 6, GB/T9341-00 "Test method for bending properties of plastics"; Technical Parameters: 1 Test force Maximum test force (kN): 5, 10, 20, 50 and other specifications Effective measuring range: 0.4%-100% FS (without internal and external files) Discrimination: 1/240000 Relative error of indication: ±0.5% 2 test speed Speed adjustment range: 0.001 ~ 500mm/min (stepless speed regulation) Relative speed error: ±0.5% Uniform test force rate, uniform deformation rate control range: 0.01% to 5% FS/S Uniform test force rate, uniform deformation rate control error: ±0.5% Constant test force, constant deformation control range: 0.5% to 100% FS Constant test force, constant deformation control error: ±1% of set value when less than 10% FS ±0.1% of the set value above 10% FS 3 Displacement (moving cross beam) Measuring range: 0～999mm Resolution: 0.001mm Relative error of indication: ±0.5% 4 deformation (at room temperature) Gage length: 50mm (or according to user's needs) Output (applicable) range: 0-5mm (or according to user's needs) Effective measurement range: 0.4% to 100% FS Resolution: 0.008mm Relative error of indication: ±0.5%
Introduction: The testing machine is mainly used for non-metallic materials such as tensile, compressive, bending normal performance at room temperature and creep and other conventional performance tests; if equipped with the corresponding accessories, it can also be used for performance testing of other test methods, such as cutting , stripping, tearing, etc. Applicable test method standards: 1, GB11546.1-2008 "Determination of plastic creep properties - Part 1: Tensile creep" 2, GB/T 15048-94 "rigid foam compression creep test method", 3 GB/T 20672-2006 "Determination of compressive creep of rigid foams under specified load and temperature conditions". 4, GB/T 1040.1-2006 "Determination of tensile properties of plastics, Part 1"; 5, GB/T1041 -92 "Test method for compression properties of plastics"; 6, GB/T9341-00 "Test method for bending properties of plastics";
