Features The melting point of WRS-3 instrument using PID (automatic temperature control) technology to control the temperature, our company is a leading domestic, international advanced products. The characteristics of the instrument is the largest visual measurement and automatic measurement of two, namely: visual observation and measurement of photoelectric detection and automatic measurement instruments in a portfolio. In this way, not only the use of automatic measurement function is convenient for the user to photoelectric detection and visual measurement; melting point material, in order to adapt to the deep color of the melting point of the sample measurement needs. Therefore, measurements of the sample range is very wide, it is very convenient to use. The instrument can also measure three samples, large screen touch screen display, type, with RS232 interface and USB interface. Technical parameters Measuring range: -320 DEG C melting point temperature Temperature display: the minimum value of 0.1 DEG C Linear heating rate: 0.2 degrees /min, 1 degrees /min, 1.5 degrees /min, 3 degrees /min, Error: less than 200 within the range of plus or minus 0.5 DEG C: In the range of 200 DEG -300 DEG C: + 0.8 Indication repeatability: heating rate is 1 C / min, 0.3 C Standard size: 1.2mm diameter capillary inner diameter 1.0mm, height 120mm The sample filling height: not less than 3mm Power supply: AC220V + 22V, 100W, 50Hz Output interface: RS232, USB
Features The melting point of WRS-3 instrument using PID (automatic temperature control) technology to control the temperature, our company is a leading domestic, international advanced products. The characteristics of the instrument is the largest visual measurement and automatic measurement of two, namely: visual observation and measurement of photoelectric detection and automatic measurement instruments in a portfolio.
