1
model | WP-25A/WP-25AB | |
Cycle Mode | Natural convection | |
Function | Temp. Range | RT+5-65℃ |
Temp. Resolution Ratio | 0.1℃ | |
Temp. Motion | ±0.5℃ | |
Temp. Uniformity | ±2.0℃ | |
Structure | Inner Chamber | B model: mirror stainless steel; without;B model: High strength galvanized sheet |
Outer Shell | cold rolling steel electrostatic spraying exterior | |
Insulation layer | High quaility rock wool board (with CE) | |
Heater | Nickel chromium alloy heating wire | |
Power rating | 0.18kW | |
Exhaust hole | φ28mm top (with function of test hole) | |
Controller | Temp. control mode |
Two temperature section intelligent PID |
Temp. set mode | Touch button setting | |
Temp. display mode |
Measuring temperature: display on the four digital tubes upper row ; setting temperature: display on the lower row |
|
Timer | 0-9999min(with timing wait function) | |
Operation function | fixed temperature operation, timing function, auto stop |
|
Additional function | Sensor deviation correction, temperature overshoot self-tuning, internal parameter locking, power-off parameter memory |
|
Sensor | CU50 | |
Safety device | over temperature sound-light alarm | |
Specification | Inner Chamber siz e(W*L*H)(mm) |
260*260*260 |
Exterior size (W*L*H)(mm) |
380*455*568 | |
Packing size (W*L*H)(mm) |
500*530*657 | |
Volume | 18L | |
Shelf number | 6 | |
Load per rack | 15kg | |
Shelf space | 29mm | |
(50/60HZ)Current rating |
AC220V/0.8A | |
NW/GW (kg) | 27/35 | |
Accessory | Shelf | 2 |
Optional accessories | shelf |