Technical Parameters: Model: WNXYR60-H Table size: Ø60mm Movement stroke X axis: ±7.5mm Movement stroke Y axis: ±7.5mm Movement formation: ±8.5° Transmission mode: screw drive Track XY axis: cross roller type Track θ axis: crossed roller bearing Material / Surface Treatment: Aluminum / Black Anodized Accuracy level: precision Motor direction: R: Right side installation L: Left side installation XY axis resolution: 5μm/2.5μm Θ-axis resolution: 0.0056°/0.0028° XY axis unidirectional positioning accuracy: 10μm XY axis repeat positioning accuracy: ±1μm θ axis unidirectional positioning accuracy: 0.05° θ axis repeated positioning accuracy: ±0.01° Load (KG): 6 XY axis idle: 2μm θ axis idle: 0.01° Parallelism: 20μm Sports concentricity: 20μm Motion parallelism: 10μm Motor type: 28 stepper motor Motor Brand: MOONS' (Ming Zhi) Slide side connector: 15pin male connector D-SUB Controller side connector: 15pin female connector D-SUB Power circuit: 24V ± 10% Control output: NPN open collector output 24V 8mA or less Output control: Detection (during induction): Output transistor OFF
Three-axis integrated design: high rigidity, low energy consumption, wide application, easy control; low-load space design, high torque rigidity, ball screw drive long life; precision sliding table with angle adjustment function, to solve the traditional method The problem
