WM3000B Manual Closed Flash Point Tester Introduction
The WM3000B closed mouth flash point tester is designed and manufactured in accordance with the requirements of the People's Republic of China standard GB / T 261 "Bin Martin-Closed Cup Method" for flash point measurement. It is used to measure the closed-point flash point temperature of petroleum products such as diesel, kerosene, insulating oil and fuel oil.
This instrument has advanced design, convenient operation, reliable performance, and accurate test results. It is an ideal substitute for similar imported instruments. The unit is used for testing and testing of flash point and ignition point of petroleum products. Technical Parameters
1. Working power: AC220V ± 10%, 50Hz
2. Temperature measurement: room temperature to 360 ° C;
3. Repeatability: ≤2 ℃;
4. Reproducibility: ≤2 ℃;
5. Accuracy: 0.5%;
6. Heating rate: in accordance with GB / T 261 standard;
7, stirring speed: 105 rpm
8. Ignition mode: electronic ignition, gas flame 3㎜ ~ 4㎜;
9. Ambient temperature: (10 ~ 40) ℃;
10. Relative humidity: ≤80%;
11. Power consumption of whole machine: not more than 1000W.
12. Optional thermometer: Rod-type mercury thermometer, in compliance with GB / T 261-2008 standard requirements.
⑴ Temperature range -5 ～ 110 ℃, division 0.5 ℃.
⑵ The temperature range is 20 ～ 150 ℃, and the division is 1.0 ℃.
(3) The temperature range is 90 ～ 370 ℃, and the division is 2 ℃.
Introduction
The WM3000B closed mouth flash point tester is designed and manufactured in accordance with the requirements of the People's Republic of China standard GB / T 261 "Bin Martin-Closed Cup Method" for flash point measurement. It is used to measure the closed-point flash point temperature of petroleum products such as diesel, kerosene, insulating oil and fuel oil.
This instrument has advanced design, convenient operation, reliable performance, and accurate test results. It is an ideal substitute for similar imported instruments. The unit is used for testing and testing of flash point and ignition point of petroleum products.
