Introduction: The WH-SP-02 dual-channel syringe pump is a high-precision fluid control device independently developed by Wenyi Chip. The system is widely used in microfluidic control related fields due to its precision, stability and strong anti-interference ability. The indicators of this product have reached and exceeded international standards. The device is easy to use and easy to operate. The parameter setting, modification and viewing of fluid control can be completed in the main interface of the boot. During the parameter input process, the model and inner diameter of the syringe can be selected directly from the list, or manually input, and then input. The parameters (flow, liquid volume, infusion type) can be used, the task can be suspended at any time during the work, and the parameters can be reset and executed immediately. Technical Parameters: 1. Dimensions: 300×130×225 mm; 2. Weight: 2.5~3kg; 3. Number of channels: 2; 4, the type of syringe: 50 ul ~ 200 ml; 5, the amount of injection per microstep: 0.107ul (10 ml syringe); 6, the maximum line speed: 65mm / min; 7, the minimum line speed: 1 mm / min; 8, working mode: injection, aspiration, according to needs; 9, linear thrust: greater than 30 kgf; 10, setting mode: the whole button contact setting; 11, display mode: 3.2 inch LCD display; 12, working voltage: DC24V; 13. Working environment: temperature 5~40 °C, relative humidity less than 80%; 14, the button life: about one million times.
Introduction: The WH-SP-02 dual-channel syringe pump is a high-precision fluid control device independently developed by Wenyi Chip. The system is widely used in microfluidic control related fields due to its precision, stability and strong anti-interference ability. The indicators of this product have reached and exceeded international standards. The device is easy to use and easy to operate. The parameter setting, modification and viewing of fluid control can be completed in the main interface of the boot. During the parameter input process, the model and inner diameter of the syringe can be selected directly from the list, or manually input, and then input. The parameters (flow, liquid volume, infusion type) can be used, the task can be suspended at any time during the work, and the parameters can be reset and executed immediately.
