1
Main Specification | Wavelength range | 190-900nm |
Wavelength accuracy | Better than ±0.25nm | |
Resolution | Two spectral lines of Mn at 279.5nm and 279.8nm can be separated with the spectral bandwidth of 0.2nm and valley-peak energy ratio less than 30%. |
|
Baseline stability | 0.004A/30min | |
Hollow Cathode Lamps | Lamp turret | 6-lamp turret (WFX-110A/120A), 4-lamp turret (WFX-130A); Auto-alignment, fully automated scan and peak-picking. |
Lamp power supply mode | 400Hz square wave pulse; 100Hz narrow square wave pulse+400Hz wide square wave pulse (WFX-110A/120A) |
|
Optical System | Monochomator | Single beam, Czerny-Turner design grating monochromator |
Grating | 1800 l/mm | |
Focal length | 277mm | |
Blazed Wavelength | 250nm | |
Spectral Bandwidth | 0.1nm, 0.2nm, 0.4nm, 1.2nm, automatic change | |
Flame Atomizer | Burner | 10cm single slot all-titanium burner |
Spray chamber | Corrosion resistant all-plastic spray chamber | |
Nebulizer | High efficiency glass nebulizer with metal sleeve, sucking up rate:6-7ml/min |
|
Emission burner provided with WFX-110A/120A | ||
Graphite Furnace | Temperature range | Room temperature~3000ºC |
Heating rate | 2000℃/s | |
Graphite tube dimensions | 28mm(L)×8mm(OD) | |
Characteristic mass | Cd≤0.5 ×10-12g, Cu≤5 ×10-12g, Mo≤1×10-11g | |
Precision | Cd≤3%, Cu≤3%, Mo≤4% | |
Standard RS-232 serial port communication | ||
Characteristic Concentration and Detection Limit |
Normal Air-C2H2 flame Oxygen-rich Air-C2H2 flame |
Cu: Characteristic concentration≤0.025mg/L, Detection limit≤0.006mg/L; |
Ba: Characteristic concentration ≤ 0.22mg/L | ||
Al: Characteristic concentration ≤ 0.4mg/L | ||
Function Expansion | Hydride vapor generator can be connected for hydride analysis | |
Dimensions and weight | Main unit | 102×49×54cm, unpacked 80kg |
Graphite furnace | 42×42×46cm, unpacked 50kg |