Introduction: Microcomputer controlled electronic universal material testing machine can test and analyze the mechanical properties of metals, non-metals and composite materials. It can be used for the testing of various insulation materials such as stretching, compression, bending, tearing, shearing and peeling. Widely used in aerospace, petrochemical, machinery manufacturing, vehicle manufacturing, wire and cable, textile fibers, plastics and rubber, ceramic building materials, food, pharmaceutical packaging, metal materials and products and other industries. Computer control, acquisition, analysis and processing of test data, drawing of stress-strain, force-time, strength-time curves, etc., and printing of test reports; US-brand imported high-precision spoke sensors used on force sources, Accuracy of 0.2 ‰, high sensitivity, the entire system to achieve a precision; equipped with mainstream brand commercial computer as a control machine, the test parameters set, work status control, data acquisition, processing analysis, display and print test results. Technical Parameters: Specifications: HTM50; Accuracy level: Level 1; Maximum load: 50KN; Effective measuring range: 200N-50KN; Force measurement accuracy: within ±1% of the indicated value; Test force resolution: The maximum load is 250,000 yards, and the internal and external scales are not divided, and the resolution of the whole process remains unchanged; Effective test width: 540mm; Effective stretching space: 850mm; Speed accuracy: within ±0.5% of the indicated value; Deformation measurement range: 2-100%FS; Deformation indication error limit: within ±1% of the indicated value; Deformation resolution: 1/±250000 of maximum deformation; Displacement indication error limit: Within ±1% of the indicated value; Displacement resolution: 0.015μm; Working temperature: 200°C-1200°C; Average temperature zone: 150mm; Temperature gradient: ≤600°C 3°C 600°C-900°C 4°C 900°C-1200°C 5°C; Heating method: three sections of heating; Furnace size: Ф80×340mm; Dimensions: Ф320×440mm;
Introduction: Microcomputer controlled electronic universal material testing machine can test and analyze the mechanical properties of metals, non-metals and composite materials. It can be used for the testing of various insulation materials such as stretching, compression, bending, tearing, shearing and peeling. Widely used in aerospace, petrochemical, machinery manufacturing, vehicle manufacturing, wire and cable, textile fibers, plastics and rubber, ceramic building materials, food, pharmaceutical packaging, metal materials and products and other industries. Computer control, acquisition, analysis and processing of test data, drawing of stress-strain, force-time, strength-time curves, etc., and printing of test reports; US-brand imported high-precision spoke sensors used on force sources, Accuracy of 0.2 ‰, high sensitivity, the entire system to achieve a precision; equipped with mainstream brand commercial computer as a control machine, the test parameters set, work status control, data acquisition, processing analysis, display and print test results.
