Brief introduction: WDW series microcomputer control electronic universal testing machine is mainly used for metal, rubber, plastic, fiber, leather, knitting, wire, cable, construction materials, wood such as tensile, compression, bending, shear, peel, tear, friction, such as mechanical property test, is a new generation of green electronic technology combined with sophisticated mechanical transmission of the new type of material testing machine. These series machines standby power consumption is low, low noise, long life, no pollution to the environment. The machine structure is reasonable, stable loading and control precision. Performance measurement and control system adopts domestic leading high-end machine with AEC - 1000 controller, cooperate with the domestic initiative of universal modular TestLive computer test software, to ensure the running of the whole system stable, accurate and reliable test measurement. Features: 1. The dynamic display: load, displacement and deformation and test curve real-time dynamic display on the screen. 2. Supporting a single sample, according to the curve, and multiple sample curves overlap. 3. Load, displacement, deformation, such as channel full closed loop control, and no impact smooth switching between each other. 4. Support all kinds of metal material mechanical performance test, such as metal tensile test, compression test, bending test, shear, etc; 5. Support various non-metallic material mechanical performance test, such as wire drawing, plastic bending, the cable stripping, etc; 6. Support the test data statistical calculations (mean, standard deviation, coefficient of variation). 7. Automatic test data calculated results, and can start advanced analysis function to check the data. 8. As many as 20 sensor linear compensation function, can improve equipment level of accuracy. 9. The results can be stored and can be read at any time, refer to the test results. 10. To analyze experimental data and curve, the curve can be arbitrary local amplification. Technical indicators: The biggest test force: 50 kn Test force measuring range: 0.4% ~ 100% / 1% ~ 100% F.S. F.S. Test force value for accuracy: + / - 0.5% / + 1% Test force resolution: + 500000 yards, not all the step, resolution remains the same The deformation measurement range: 1% ~ 100% F.S. Deformation value relative error: plus or minus 0.5% Deformation resolution: + 500000 yards, not all the step, resolution remains the same Big extend measurement range: 10 ~ 800 mm Large extension value relative error: plus or minus 0.5% Great extension resolution: 0.0025 mm Beam displacement relative error value: plus or minus 0.5% The displacement resolution: 0.000025 mm Beam speed adjusting range: 0.001 to 500 mm/min Beam speed relative error: + 0.5% / + 1% Deformation rate adjustment range: 0.005% ~ 8% f.s/s Deformation rate relative error: plus or minus 0.5% Test force rate adjustment range: 0.01% ~ 10% f.s/s Test force rate relative error: rate < 0.1% f.s/s: + / - 1% rate of 0.1% or higher f.s/s: plus or minus 0.5% Power: 1.5 kW/AC380V / 50 hz Host appearance size: 980 mm * 620 mm * 2140 mm Weight: 420 kg
Brief introduction: WDW series microcomputer control electronic universal testing machine is mainly used for metal, rubber, plastic, fiber, leather, knitting, wire, cable, construction materials, wood such as tensile, compression, bending, shear, peel, tear, friction, such as mechanical property test, is a new generation of green electronic technology combined with sophisticated mechanical transmission of the new type of material testing machine. These series machines standby power consumption is low, low noise, long life, no pollution to the environment.
