Features: 1.VNY series brushless micro vacuum pump - with the industry's leading dual mode speed regulation: frequency modulation or analog voltage speed control (two choices one), the pump motor speed can be adjusted by only one signal line (indirect adjustment of the pump Flow) and control the start and stop of the pump; no need for high-power drive, very suitable for embedded automatic control system (only imported full version has the above functions)! 2. The peak flow rate is up to 16 liters/min, and the maximum negative pressure is -62 kPa (both can not be achieved at the same time). The maximum flow rate of the original speed-regulating air pump is only 6 liters/min. The speed control air pump can also have a large flow! 3. High-grade brushless motor technology in the forefront of the industry: It adopts special imported brushless long-life motor, which is very suitable for frequent start-stop or long-term continuous operation conditions. It has strong load capacity, low energy consumption and can be installed in any direction. 4. Imported full version with speed control, reverse connection, overheating, overload 4 functions or protection, imported simplified version with reverse connection, overload 2 heavy protection, domestic version only with reverse connection protection: (1) Reverse connection protection: If the positive and negative poles of the pump are not burned, the pump will not work, and after the correct connection, the pump will resume normal operation; (2) Overheat protection: Unexpected conditions may cause the pump motor temperature to rise abnormally, which will automatically protect the machine from stopping and avoid burning the motor; (3) Overload protection: foreign matter falls into the motor and may be stuck. It will automatically protect the machine from stopping and avoid burning the motor. 5. Rich connector selection, you can choose the default plastic connector to connect with silicone hose to reduce the cost; you can also customize the imported brand SMC metal quick-change connector, straight into the nylon tube to ensure fast, convenient and more reliable connection. 6. Long life: high-quality brushless motor drive, using better raw materials, equipment, process manufacturing, all moving parts use durable products, improve pump life in all directions. 7. Low interference: does not interfere with surrounding electronic components, does not pollute the power supply, and will not cause the control circuit, LCD screen and other crashes; 8. Only 580 grams weight, small volume (about the palm of a person), allowing the medium to be rich in water vapor, low noise; shock absorber design is more reasonable; 9. The pumping end can carry a large load, even blocking is also normal work; the exhaust end needs to remain unobstructed; no oil, no pollution, no maintenance Technical Parameters: Model: VNY6216 Voltage (VDC) : 24 Load current (A): <1.2 Power (W) <: 28.8 Flow rate (L/min) Peak flow: 16 Average flow: 9 Relative vacuum (negative pressure) (KPa) : ≈-62
VNY series brushless micro vacuum pump - with the industry's leading dual mode speed regulation: frequency modulation or analog voltage speed control (two choices one), the pump motor speed can be adjusted by only one signal line (indirect adjustment of the pump Flow) and control the start and stop of the pump; no need for high-power drive, very suitable for embedded automatic control system (only imported full version has the above functions)!
