Introduction: VM-E series "drying method" halogen moisture analyzer adopts high-efficiency drying heater-high-quality ring halogen lamp to quickly and uniformly heat the sample, and the moisture of the sample is continuously dried. The whole measurement process is fast, automatic and simple. The instrument displays the measurement results in real time: moisture value MC%, solid content DC%, sample initial value g, final value g, measurement time s, temperature final value ℃, trend curve and other data. The instrument can input data to printers, computers, PLCs, etc. through the RS232 serial port, and can quickly determine the moisture in solids, liquids, and powders within a few minutes (most samples). The operation is simple, and it integrates multiple heating modes and working methods. It meets diversified measurement needs and is widely used in industries such as grain, food, agriculture, chemical industry, plastics, new energy, new materials, medicine, scientific research, and testing. Features: 1. It can be used without installation, debugging, training and unpacking 2. The operation is simple, one-key operation, automatic shutdown, quickly get the moisture and other values 3. The heat dissipation unit adopts an aluminum alloy integrated heat dissipation panel to absorb excess heat for effective heat dissipation 4. The visual and transparent front window design is beautiful and generous, and the moisture change can be observed in real time during the working process of the instrument 5. Multiple data display methods: moisture value, initial value of sample, final value of sample, measurement time, initial value of temperature, final value of temperature 6. 100 kinds of user-defined measurement methods, convenient and quick to store and recall, no need to set each time 7. Imported materials and imported parts, stable, accurate and long service life of the instrument are our eternal pursuit 8. The data processing CPU adopts imported chips from the United States to ensure the stability and accuracy of the instrument's calculations 9. The temperature control and sensor module are newly upgraded, heating up faster, and temperature control is even 10. Brand-new appearance design, imported raw materials and special formula integrally formed, real high temperature resistance 11. Unique windproof design and anti-electromagnetic radiation design to protect the stability and accuracy of the weighing system of the instrument 12. RS232 serial port, can expand computer communication, printer communication, PLC and network management 13. The electromagnetic force sensor imported from the United States is used, which has higher stability and rejects temperature drift. 14. Meet a number of national standards and American standards Technical Parameters: Product model: VM-E50 Weighing accuracy (d): 0.005g Moisture readability: 0.01% Moisture range MC%: 0.00%-100.00% Solid content range DC%: 100.00%-0.00% Weighing process: 120g (optional 220g/300g) Load cell: German HBM Calibration method: external weight calibration (range calibration, linear calibration) Repeatability (standard deviation): Allow ≤3d (actual ≤1d) Heating method: halogen lamp heating Temperature sensor: PT-1000 high-precision platinum and rhodium temperature sensor Drying program: standard heating, step heating, rapid heating Heating range: 40-200℃ Heating interval: 0.1℃ Drying time setting: 1-99 minutes interval 1 minute Stop mode: timing, manual, automatic (stop in the state of no water and constant weight) Measurement procedures: 100 groups of custom measurement procedures Display parameters: moisture value, solid content, dry weight ratio, wet weight ratio, total sample weight g sample dry weight g temperature °C Display mode: 5 inch LCD touch screen Sample pan: 100 aluminum sample pans with 90mm diameter, stainless steel sample pans are optional Heating chamber height: 23mm Visible sample: transparent window, you can observe the internal sample changes Protective device: Halogen lamp protective toughened glass Baud rate: 2400, 4800, 9600 Data communication: RS232 can be connected to a computer or printer, PLC, etc. Computer software is optional Printing function: optional printer (thermal, needle, sticker, etc.) Use environment: 1-38℃ (18-25℃ ideal temperature) Working power supply: Voltage 220v±10%, frequency 50HZ±1HZ (110V power supply and power cord can be customized for export) Host size (W*D*H): 315mm*210mm*205mm Power supply voltage: 220V 50HZ maximum power 500W Weight: 5.8KG
Introduction: VM-E series "drying method" halogen moisture analyzer adopts high-efficiency drying heater-high-quality ring halogen lamp to quickly and uniformly heat the sample, and the moisture of the sample is continuously dried. The whole measurement process is fast, automatic and simple. The instrument displays the measurement results in real time: moisture value MC%, solid content DC%, sample initial value g, final value g, measurement time s, temperature final value ℃, trend curve and other data. The instrument can input data to printers, computers, PLCs, etc. through the RS232 serial port, and can quickly determine the moisture in solids, liquids, and powders within a few minutes (most samples). The operation is simple, and it integrates multiple heating modes and working methods. It meets diversified measurement needs and is widely used in industries such as grain, food, agriculture, chemical industry, plastics, new energy, new materials, medicine, scientific research, and testing.
