Introduction: VGB-1 stainless steel vacuum glove box is a small vacuum glove box, cavity size is 560mm × 430mm × 410mm, equipped with a front room, mechanical pressure gauges, vacuum flanges, can create a vacuum or low water and low oxygen clean environment It is an ideal choice for experiments that are particularly sensitive to air. Features: 1, the overall use of 304 stainless steel (thickness 3mm), the box welded with ribs, so that the chamber to achieve high vacuum when the box will not be deformed. 2. There is a 1500W power strip in the box, which is connected to the three-pin plug on the outer wall of the box. When the external power supply is connected, the power strip can supply power to the instrument inside the glove box. 3. Close the vacuum flange. The vacuum degree in the glove box can reach 0.5torr (mechanical pump), and then the inert gas can be introduced. The moisture can be less than 180ppm and the oxygen content can be lower than 200ppm. 4. Close the internal flange of the front stage to connect the front chamber and the main chamber with an independent vacuum chamber. 5, has passed CE certification. Technical Parameters: Power supply: three-pin plug Cavity: 560mm×430mm×410mm Foreroom vacuum: 0.05torr The main cavity vacuum: 0.5torr Leakage rate: 6torr/h Maximum positive pressure: 1.1atm Size: 940mm × 480mm × 490mm; Weight: 95kg
Introduction: VGB-1 stainless steel vacuum glove box is a small vacuum glove box, cavity size is 560mm × 430mm × 410mm, equipped with a front room, mechanical pressure gauges, vacuum flanges, can create a vacuum or low water and low oxygen clean environment It is an ideal choice for experiments that are particularly sensitive to air.
