VC63A hand-held vibration meter Brief introduction:
1. Only the sensor is connected to form a complete measurement system;
2. Peak-peak value (p-p) is used to represent the measured vibration displacement;
3. Root mean square value (RMS) was used to represent the measured vibration speed;
4. 3-bit semi-liquid crystal display; Basic functions:
Test scope:
Vibration displacement (P-P) : 0-1000 microns
Vibration speed (RMS) : 0~71mm/s
Frequency response range and amplitude error:
Vibration displacement (p-p) : 12 ~ 200Hz, less than or equal to 10%
Vibration speed (RMS) : 12 ~ 500Hz, less than or equal to 10%
Linear amplitude error:
Vibration displacement (P-P) : 0-20 microns, less than 10%
> 20 microns, plus or minus 5% or less
Vibration speed (RMS) : 0 ~ 2mm/s, less than or equal to 10%
> 2 mm/s, plus or minus 5% or less
The vibration detector is a microprocessor-based* newly designed machine condition monitoring instrument with vibration detection, bearing status analysis and infrared temperature measurement. The operation is simple, and the status alarm is automatically indicated. It is very suitable for the field equipment operation and maintenance personnel to monitor the equipment status, find problems in time, and ensure the normal and reliable operation of the equipment.
