Introduction: The vacuum controller is used as a laboratory to display, adjust and control the vacuum of the vacuum system. Usually together with the vacuum pump to form the vacuum control system of the rotary evaporator, it can complete the repeatable distillation experiment and realize the recovery of multiple solvents efficiently and automatically. Features: 1. Wide measurement and control range, 1-1000mbar 2. Single-point control and program control dual control modes, which can be flexibly selected according to requirements; 3. It can store 5 programs, and each program can contain up to 5 sections of programming control; 4. Large screen TFT touch screen display control, easy to operate; 5. All parts in contact with steam or liquid are made of high-performance materials such as PTFE and ceramics. It can effectively resist the corrosion of organic solvents, water, acid and alkali; 6. Built-in vent valve can pass inert gas to the system equipment; 7. The one-button pressure relief function facilitates the installation and disassembly of the vacuum system; 8. It can be connected to the pump power control and temporarily shut down the pump power after reaching a stable vacuum. Energy saving and environmental protection; can also work in the normally open state of the pump. Technical parameter: Vacuum setting range: 1-1000mbar Measuring range of vacuum degree: 1-1000mbar Control operation mode: single point control operation mode, program operation mode Control program: 5 programs can be stored, each program contains 5 steps of control (Can set vacuum degree and timing time) Setting method: touch screen setting Display: 5 inch TFT Sensor overload pressure: 1500mbar Connection interface diameter: 8mm Materials in contact with steam: PTFE, PP, silica gel, ceramics Power: 600W Compatible with vacuum pump requirements: 50Hz vacuum pump power 400W 60Hz vacuum pump power 500W Dimensions W×D×H: 189×207×193mm Weight: 4.0kg Input power: 110—240V, 50Hz/60Hz Working environment: 10℃～40℃, ≤80%RH
Introduction: The vacuum controller is used as a laboratory to display, adjust and control the vacuum of the vacuum system. Usually together with the vacuum pump to form the vacuum control system of the rotary evaporator, it can complete the repeatable distillation experiment and realize the recovery of multiple solvents efficiently and automatically.
