Introduction: The safety BOD5 measuring instrument UPW-BA506 is a new type of instrument for the determination of biochemical oxygen demand by the air pressure difference method. It can accurately provide measurement results comparable to the chemical dilution method. The reading is intuitive and easy to use and maintain. It is ideal for work analysis tool. It can be widely used in environmental monitoring, petrochemical, medical and health, teaching and scientific research and other departments to monitor water quality. Features: 1. Mercury-free differential pressure sensing method (breathing method) to measure BOD in water, no mercury poisoning, safe and reliable, can measure 6 samples at the same time 2. The user can choose the measurement range, the water sample to be tested below 2000mg/L can be measured directly without dilution 3. The instrument can automatically analyze and draw the water sample measurement data curve, without manual conversion, the instrument can directly display the BOD concentration value 4. It has a variety of stirring modes, which can be set according to the actual measurement needs and prolong the service life of the instrument 5. Unattended detection data is automatically saved to ensure that data is not lost 6. With power-off protection function, the data can be automatically saved after accidental power-off, and the experiment process will continue automatically after power-on 7. You can view the current experimental process data and historically stored experimental data at any time 8. The measurement process data can be automatically recorded, and the recording frequency can be selected from 5min/time to 24h/time 9. Large 7-inch true color LCD screen display, full touch operation, comparison display of all numerical lists, simple and intuitive 10. The cultivation time can be flexibly adjusted according to demand, up to 30 days 11. The instrument can set the temperature compensation time. When the sample temperature is high or low, the analyzer can delay for up to 3.5 hours, until the delay is over before starting the measurement 12. The instrument has a built-in microprocessor control system with superior performance, which automatically completes the measurement process without the need for special personnel to take care of it. After the measurement, the instrument automatically shuts down to save energy. 13. The instrument has a large memory space, which can store up to 30 years of data records 14. Built-in micro-printer, which can print test results or measurement process data at any time 15. For data transmission, RS232/USB can be directly uploaded to the computer, which is convenient and fast Technical indicators: Measuring range: 5-2000mg/L Measurement accuracy: ±10% Results recording frequency: 5 minutes - 24 hours Measurement period: 5 days, 7 days, 10 days...30 days can be set flexibly Number of measurements: 6 groups Stored data: 30 years Communication interface: RS232/USB optional Culture temperature: 20±1℃ Power configuration: 110-230V 50-60HZ
Introduction: The safety BOD5 measuring instrument UPW-BA506 is a new type of instrument for the determination of biochemical oxygen demand by the air pressure difference method. It can accurately provide measurement results comparable to the chemical dilution method. The reading is intuitive and easy to use and maintain. It is ideal for work analysis tool. It can be widely used in environmental monitoring, petrochemical, medical and health, teaching and scientific research and other departments to monitor water quality.
