UPI-600 series fully automatic iodine analyzer Introduction: The UPI-600 series fully automatic iodine analyzer can be used to analyze iodine in water and urine. The analysis of water iodine meets the standard requirements of GB 5750 "Iodides", while the analysis of urine iodine meets the standard requirements of WS/T 107-2016 "Arsenic catalyzed spectrophotometric determination of iodine in urine". This instrument can also be extended to detect iodine content in food. Scope of application: Determination of iodide content in drinking water and its source water; characteristic: 1. Compliant with national standard methods, fully automatic sample transfer, fully automatic reagent addition, non-contact fully automatic mixing, fully automatic digestion, fully automatic detection, and fully automatic waste cleaning. 2. The reaction process uses a super constant temperature water bath to control the reaction temperature. The instrument operates completely automatically except for sampling, without the need for personnel intervention. 3. Fully automatic high-speed stable three-axis robot motion system, quickly and stably realizes the transfer of samples between the test area, water bath area, and detection area, with high-sensitivity limit switches to prevent test failure or instrument damage caused by exceeding the operating limit 4. Using the whole pallet method to transfer 6 samples at once, which is six times faster than the traditional mechanical arm method of grabbing one sample at a time 5. The sample area and water bath area can be customized and expanded according to the customer's requirements for sample quantity and measurement speed, ensuring accurate and fast completion of automatic sample measurement work 6. The water bath digestion system adopts micro boiling water bath technology to effectively prevent water vapor from escaping, and achieves accurate constant temperature through PWM technology. It is equipped with high and low water level sensors, which can automatically replenish water to prevent equipment damage caused by dry burning. The water bath temperature can be flexibly set according to usage needs 7. Constant temperature automatic stirring and titration, using biomimetic technology, imported color sensor simulates human eye recognition of color to determine the endpoint, not affected by sample color, turbidity impurities, etc 8. Multi channel and multi light source colorimetric system, supporting simultaneous analysis of batch samples and simultaneous detection of high and low concentration samples. The detection data automatically records blank energy, standard energy, linear coefficient, absorbance, and concentration values for easy traceability 9. Equipped with a 10 inch color touch screen display, built-in professional industrial control system, human-machine interactive operation, higher stability, no need for online connection to carry out sample testing work, eliminating unstable factors caused by wired or wireless connection 10. Built in micro printer, which can be flexibly set to automatically save and print experimental result data, facilitating the statistics of experimental personnel 11. Equipped with automatic pipeline cleaning function, using imported pipes, resistant to strong acid and alkali corrosion 12. Real time reminder function for remaining reagent volume, automatically realizing safe monitoring of reagent liquid volume, and automatically alerting when reagent is in short supply 13. Support separate or mixed testing of high and low concentration samples 14. After the testing is completed, the testing data can be automatically uploaded to the LIMS laboratory management system to achieve the integration of testing instruments and management systems Technical parameters: Sample tray position: 24/48/60/108 (more sample grades can be customized according to needs) Dissolving positions: 12 positions/24 positions/36 positions/60 positions (more dissolving positions can be customized as needed) Detection bit: 6 bits/12 bits/24 bits Detection speed: up to 80 samples per hour (during continuous measurement)
Introduction: The UPI-600 series fully automatic iodine analyzer can be used to analyze iodine in water and urine. The analysis of water iodine meets the standard requirements of GB 5750 "Iodides", while the analysis of urine iodine meets the standard requirements of WS/T 107-2016 "Arsenic catalyzed spectrophotometric determination of iodine in urine". This instrument can also be extended to detect iodine content in food. Scope of application: Determination of iodide content in drinking water and its source water;
