Introduction:
UNIPOL-810 precision grinding and polishing machine is used to polish crystals, metals, ceramics, glass, rock samples, ore samples, PCB boards, refractory materials, composite materials, and seals, such as optical components, compound semiconductor substrates, and ceramic substrates. , sapphire, bismuth vanadate, lithium niobate, gallium arsenide. The machine is equipped with peach shaped hole tray, which is more convenient for grinding and polishing the metallographic sample. Features:
1. Equipped with drip feeding device, it can realize the automatic dropping of slurry.
2, stepless speed regulation, digital display.
3, simple and quick operation.
Technical Parameters
Power supply: 220V
Power: 175W
Polishing disc rotation speed: 20rpm-600rpm
Polishing pan: Ø203mm
Loading plate: Ø80mm
Station: 1
Drip bucket volume: 0.85L
Size: 500mm×440mm×550mm;
Weight: 45kg Installation conditions
This equipment is required to be used at altitudes below 1000m, temperature 25°C±15°C, and humidity 55%Rh±10%Rh.
1. Water: The equipment is equipped with a water inlet and a water outlet, and it needs to connect tap water and drainage
2, electricity: AC220V 50Hz, must have a good ground
3, gas: no
4、Workbench: size 800mm×600mm×700mm, load-bearing more than 200kg
5, ventilation device: no Standard accessories
Cast iron grinding disc: 1
Aluminum alloy magnetic disk: 1
Tray: 1
Repair ring: 1
Peach hole tray 1 set
Magnetic plate: 2 pieces
Study throwing bottom: 5 tablets
Sandpaper: 8 pieces
Polishing pad: 1 piece each (matte leather, synthetic leather, polyurethane)
Diamond polishing paste: 1
Corundum grinding powder: 0.5kg
Paraffin sticks: 4
Introduction:
UNIPOL-810 precision grinding and polishing machine is used to polish crystals, metals, ceramics, glass, rock samples, ore samples, PCB boards, refractory materials, composite materials, and seals, such as optical components, compound semiconductor substrates, and ceramic substrates. , sapphire, bismuth vanadate, lithium niobate, gallium arsenide. The machine is equipped with peach shaped hole tray, which is more convenient for grinding and polishing the metallographic sample.
