Introduction: UNIPOL-1210 metallographic grinding and polishing machine is mainly used for grinding and polishing various metallographic specimens. This machine adopts Ø300mm aluminum grinding and polishing disc, which not only has excellent rigidity, but also can obtain higher linear speed and improve the efficiency of metallographic sample production under the same speed. Features: 1, stepless speed regulation, digital display rotation, easy to operate. 2, beautiful appearance, smooth operation, low noise. Technical Parameters Power: 210W Polished disc rotation speed: 50rpm-600rpm Polishing disc: Ø300mm Size: 650mm × 500mm × 250mm; Weight: 42kg Installation conditions: This equipment is required to be used at altitudes below 1000m, temperature 25°C±15°C, and humidity 55%Rh±10%Rh. 1. Water: The equipment is equipped with a water inlet and a water outlet, and it needs to connect tap water and drainage 2, electricity: AC220V 50Hz, must have a good ground 3, gas: no 4、Workbench: size 800mm×600mm×700mm, load-bearing more than 200kg 5, ventilation device: no Standard accessories: Magnetic piece: 1 piece Grinding film: 5 pieces Sandpaper (240#, 400#, 800#, 1500#): 2 pieces each Polishing pad (matte leather, synthetic leather): 1 tablet each Diamond polishing paste (W2.5): 1
Introduction: UNIPOL-1210 metallographic grinding and polishing machine is mainly used for grinding and polishing various metallographic specimens. This machine adopts Ø300mm aluminum grinding and polishing disc, which not only has excellent rigidity, but also can obtain higher linear speed and improve the efficiency of metallographic sample production under the same speed.
