UGS-31T gas pressure generator Introduction: The uninterrupted high-pressure gas workstation can output stepped pressure regulation, with the gas pressure station as the pressure source, obtaining medium and high-pressure gas pressure, and using a volumetric tank as the automatic generation and storage of pressure. The workstation can adjust the output pressure arbitrarily, maintaining a constant pressure source of the upper limit range required for pressure calibration at any time. For frequent batch calibration of pressure gauges, this system saves time and effort compared to direct manual electric pressure, improves pressure calibration efficiency, and achieves no overpressure. It is a good assistant in calibration work. characteristic: 1. Equipped with an electric pneumatic pump, it does not require an external air source or pressurization, and automatically generates gas pressure. 2. Flow regulation: Equipped with a built-in gas storage tank and a flow control valve, it controls the output gas flow rate and has the ability to continuously output gas pressure at a constant pressure under load. 3. High pressure gas source compresses air to generate gas pressure, which can be output in steps. 4. Anti overload, no overpressure, no need for filtration. 5. It can be used in conjunction with pressure gauge connection stations, gas pressure regulator connection stations, and can be connected to other pressure calibration stations. The gas source is one-way output, preventing reverse entry into other media and ensuring that the workbench is always in a gas medium state. 6. Clean system: Single cycle output gas pressure 7. Sewage system: single cycle setting, directly discharging the used gas in the pipeline 8. Control function: upper and lower limit setting, automatic start stop pressure compensation function 9. Materials used: Cabinet made of aluminum alloy, cold-rolled steel plate, and countertop made of wooden structure 10. Configuration Expansion: Reserve 2U/3U chassis size for use with fully automatic pressure controllers and other instruments 11. Surface treatment: phosphating primer treatment, powder coating on the outside, RAL7035 color, acrylic crystal panel 12. Mobile conditions: Equipped with (Fuma Wheel) silent pulley 13. Cabinet Security: Equipped with specialized anti-theft locks to prevent non professionals from touching Technical parameters: model: UGS-31T Working medium: Air Usage pressure: High pressure gas storage station with continuous flow pressure output Pressure range: (0-31.5) Mpa (-0.095-31.5) MPa alternative Output interface: 2-channel air pressure output (high pressure output interface, constant pressure reduction output interface); 1-channel vacuum output interface (optional) Boosting speed: Boosting speed is 3MPa/minute, and zero start can automatically boost to 31.5MPa within 10 minutes. Fixed step pressure reduction output pressure, adjustable output within (1-21) MPa Load start: With load start, the pressure is around 21MPa, and it only takes 3-5 minutes to build pressure to 31.5MPa during load start Specification and dimensions: 600mm (length) X600mm (width) X800mm (height) Power: AC220V,50Hz,750W Prevention level: IP44 Noise: 62dB
Introduction: The uninterrupted high-pressure gas workstation can output stepped pressure regulation, with the gas pressure station as the pressure source, obtaining medium and high-pressure gas pressure, and using a volumetric tank as the automatic generation and storage of pressure. The workstation can adjust the output pressure arbitrarily, maintaining a constant pressure source of the upper limit range required for pressure calibration at any time. For frequent batch calibration of pressure gauges, this system saves time and effort compared to direct manual electric pressure, improves pressure calibration efficiency, and achieves no overpressure. It is a good assistant in calibration work.
