TY-30-3 direct reading electromagnetic water meter
Introduction: The electromagnetic water meter is a battery powered electromagnetic induction water meter. Battery powered electromagnetic water meters can be installed anywhere without sacrificing accuracy and performance,Without the need for mains power, it is specially designed for individual water applications such as water intake, network distribution, metering and irrigation, it has intelligent information and high measurement It is easy to install and save user investment, bringing users a brand-new meter experience. Direct-reading electromagnetic water meter, on-site display instantaneous flow and cumulative flow, It is powered by battery, no external power is required, and high-definition LCD screen is selected, which is intuitive, convenient and maintenance-free. Features: 1. The instrument is easy to install - the instrument can be buried underground or installed in a well. The design of IP68 (NEMA6P) is not affected by any installation position of the instrument in the pipeline, And no filter is required. 2. Low pressure loss - straight-through measuring tube ensures minimal pressure loss, even at the highest flow rates. It can reduce the pressure on the entire network system, which helps It is used to prevent the pumping station from being over-pressurized, resulting in pipeline rupture and leakage. 3.Zero Maintenance - With no moving parts design, and the battery life can be up to 6 years. 4. Two-way measurement - Two-way flow measurement can be achieved with only one meter. 5. Smart Meter - Leak detection, data logger function, and error self-checking are possible with only one meter. Technical parameter: Connection method: flange type (GB/T9119-2010) Measurement parameters: instantaneous flow, cumulative flow, pressure (optional) Diameter (mm): DN50-DN300 Pressure class (MPa): 1.0MPa to 4.0MPa (by caliber) Lining Material: Rubber Conductivity: ≥20us/cm Electrode: Stainless Steel 316L Protection class: IP68 Temperature: Medium temperature: 0℃~+70℃ Ambient temperature: -25℃~+70℃ Storage temperature: -40℃~+70℃ Housing material stainless steel converter Protection class: IP68 Measuring range: 0m/s to ±15m/s continuously measurable Measurement accuracy: 2 or 1, the implementation of the standard GB/T778-2007 Power supply mode: built-in 3.6V lithium battery Built-in lithium battery life: Communication battery: 1.5 years to 6 years (test results in the laboratory will be affected by changes in environment and temperature, and by communication methods and frequencies) Excitation frequency: Lock state: 6.25HZ; Test state: 1/15Hz Positive/reverse flow measurement: When the flow is positive, the flow direction is the same as the direction of the flow direction mark, and the flow direction is opposite to the direction of the flow direction mark when the negative flow rate is used. Display mode: Various display modes, 9 combinations, display instantaneous flow, positive and negative cumulative flow, net flow, etc. Display and control: Data can be input through four photoelectric keys, ten digits display cumulative flow (accurate to three decimal places), five digits display instantaneous flow (accurate to small display and control digits two digits), the accuracy can be automatically adjusted, and the Display instrument diagnosis and report status, user password control, menu-based parameter setting Output mode: GPRS communication, RS485 Alarm function: alarm status display, sensor failure, converter failure, battery undervoltage, empty camp, measurement status alarm, output alarm, etc. Pressure Sensor Pressure range: 0MPa-1.0MPa Power supply: 3.6V lithium battery Ambient temperature: -25℃-85℃ Response time: 2ms Accuracy: Linear, Hysteresis and Repeatability <+/-0.3%fs Housing: Stainless Steel
Introduction: The electromagnetic water meter is a battery powered electromagnetic induction water meter. Battery powered electromagnetic water meters can be installed anywhere without sacrificing accuracy and performance,Without the need for mains power, it is specially designed for individual water applications such as water intake, network distribution, metering and irrigation, it has intelligent information and high measurement It is easy to install and save user investment, bringing users a brand-new meter experience. Direct-reading electromagnetic water meter, on-site display instantaneous flow and cumulative flow, It is powered by battery, no external power is required, and high-definition LCD screen is selected, which is intuitive, convenient and maintenance-free.
