Introduction: A planetary mixer usually consists of two agitating blades and a scraping blade. The two planetary agitating blades rotate around the common axis along the wall of the vessel while rotating around the axis of the vessel. Take the material on the wall of the container and bring the material to the middle. After one rotation, the blade has passed the entire container. After 3 turns, most of the material has been thoroughly mixed. After only 36 cycles, all the materials are completely mixed. . Features: 1. Processing capacity 0.3-10L; 2. The stirring paddle is both autobiographical and revolving, stirring without dead angle, suitable for medium and high viscosity material mixing (0-15 million cps) 3. The precise temperature is controlled at 0-300 °C with an accuracy of ±2 °C; 4. The degree of vacuum is -0.098mpa, and the pressure is maintained for 24 hours; 5. Standard twist frame mixing paddle, paddle, claw, hook, straight frame for selection 6. Stirring paddle paddle casting molding to ensure accuracy and strength; 7. With high-speed dispersing shaft, 17m / s line speed, better mixing effect; 8. Work bench hydraulic lifting type, mixing, pressing material is realized, bright and beautiful; 9. Fine processing, low gap between the stirring paddles, the stirring paddle and the wall of the kettle; 10. Particularly suitable for medium and high viscosity material mixing, such as lithium electronic paste, glue, paste, adhesive, composite materials, etc. Technical Parameters: Specification model: TXJ-0.5; TXJ-2; TXJ-5; Structural form: working table hydraulic lifting bucket type; with closed vacuum; with temperature control system; monodisperse shaft, double stirring shaft, with scraping wall, temperature measuring shaft a total of 5 axes; Stirring part: double twist frame stirring Power: 0.55/0.75/1.1Kw Power: 380V 50Hz 4P Body casting Axis self-speed: 0-110 rpm, adjustable Axis common speed: 0-80 rpm, adjustable Gap value: Mixing paddle and paddle tolerance: 1-5mm
Stirring part: Power: 0.55/0.75/1.1Kw Power supply: 380V 50Hz 2P Speed: 0~3800 rpm, frequency control Dispersion disc diameter: Φ50mm SUS304 material Line speed: 0~11m/s Stirring container: Effective volume: 0.5/2/5L Design volume: 1.1/4.2/8.2L Liner material: SUS304 Closed: the flange surface of the mixing drum and the upper barrel are sealed by a sealing ring; Processing: mirror polishing after turning the inner wall to ensure good roundness; Jacket: Double-layer, jacket with reinforced baffle for cold or hot water (steam or hot oil) Vacuum system: The stirring process is carried out under vacuum; the degree of vacuum: ≤ -0.098 Mpa; the pressure is maintained for 24 hours. Electronic control system: The control panel has a power indicator, current, voltmeter, digital speedometer and speed adjustment button. Stirring start stop button, lifting, emergency stop button, spotlight, vacuum, temperature controller, etc. Secure operating system: Stirring protection, positioning protection, vacuum protection; Pressing machine: Standard presser, placed on the workbench.
Introduction: A planetary mixer usually consists of two agitating blades and a scraping blade. The two planetary agitating blades rotate around the common axis along the wall of the vessel while rotating around the axis of the vessel. Take the material on the wall of the container and bring the material to the middle. After one rotation, the blade has passed the entire container. After 3 turns, most of the material has been thoroughly mixed. After only 36 cycles, all the materials are completely mixed. .
