TTL-GDC dry bath nitrogen blowing instrument Introduction: The TTL-GDC nitrogen blowing instrument developed by our company provides a processing capacity of 36 samples per batch. Adopting dry bath aluminum bead heating method, the temperature rises quickly and evenly. Aluminum bead dry bath is suitable for different sizes of test tubes and can simultaneously process samples of different sizes of test tubes. Avoiding water vapor pollution during water bath heating and insufficient replacement of conductive media. The dry bath pot can be rotated in any direction and angle, and the operator is always facing the dry bath pot to install or remove the test tube. Features: 1. Applicable to test tube, Erlenmeyer flask, centrifuge tube and beaker 2. Use nitrogen or air as the evaporation agent 3. Automatic constant temperature control dry bath heating method, uniform heating 4. Aluminum beads are used as the thermal conductive medium, without the need to replace the conductive medium 5. The dry bath pot and the blowing needle tube rotate synchronously at any angle with the spindle as the center of the circle 6. The test tube/beaker is always in front of the operator for easy installation and removal 7. When the dry bath pot and test tube rotate, uninterrupted power and gas supply 8. Heating method of dry bath pot, no water vapor pollution 9. Dry bath heating method, no visual interference to the operator 10. Aluminum bead heating method, without the need to clean the dry bath pot and replace the thermal conductivity medium 11. The height of each blowing needle tube is independently adjusted 12. Independent control of gas flow rate for each blowing needle tube 13. Quick installation of buckle type stainless steel air blowing needle, making disassembly and cleaning more convenient 14. Electrically controlled lifting and lowering of the blowing needle tube and air distribution: stroke 100 ± 2 (mm) 15. The built-in electric lifting system optimizes the product structure and maintains the stable operation of the sample rack 16. Design of built-in nitrogen pipeline, with no entanglement in the intake pipeline 17. Gas flow meter with needle valve, controlling and displaying the total gas consumption 18. Separate design of dry bath pot and control part, extending the service life of electrical components 19. All components are laboratory grade, made of stainless steel and Teflon coating, with characteristics of acid and alkali resistance, corrosion resistance, and high temperature resistance Technical parameters: Heating method: dry heating Temperature control range: room temperature~130 ℃ Temperature fluctuation: ± 1 ℃ Test tube size: 10-29mm Gas flow rate: 0-15L/min Number of sample digits: 36 Heating power: 1000W
Introduction: The TTL-GDC nitrogen blowing instrument developed by our company provides a processing capacity of 36 samples per batch. Adopting dry bath aluminum bead heating method, the temperature rises quickly and evenly. Aluminum bead dry bath is suitable for different sizes of test tubes and can simultaneously process samples of different sizes of test tubes. Avoiding water vapor pollution during water bath heating and insufficient replacement of conductive media. The dry bath pot can be rotated in any direction and angle, and the operator is always facing the dry bath pot to install or remove the test tube.
