Introduction: This product is designed and manufactured in accordance with the requirements of "Solid Waste Leaching Toxic Leaching Method Sulfuric Acid and Nitric Acid Method" (HJ/T 299-2007) and "Solid Waste Leaching Toxicity Extraction Method Acetate Buffer Solution" (HJ/T 300-2007). The company's patented sample container is installed at a 30-degree angle to the rotating shaft. The sample container is shaken while it is being flipped, increasing the collisions and friction between the samples in the container, making the sample react, elute, and extract in the container. More thorough. Scope of application: Research and application fields such as toxicity identification of environmental protection, chemical industry, fermentation, solid waste, medicine, chemical industry, surface water, industrial wastewater, domestic sewage, etc. Technical Parameters: Model Number: TTL-864 type Number of samples: 4 Sample throughput: 2000ml Sample handling methods: positive, reverse and roll; sample holder tilted 30 degrees; vibration Turning speed: Digital display: 0-100±0.2r/min Flip speed control: stepless speed regulation Turn way 1. Forward, Pause, Reverse (with manual flip function) 2. Forward and reverse time setting: 1s to 99s, 1min to 99min, 1h to 99h 3 pause time setting: 1s ~ 99s Vibration function 1. Vibration frequency: 0-200 times / min 2. Vibration frequency: 0-100 times / min 3.a Stepless speed regulation b Vibration amplitude: 8mm c can be turned on or off Time setting: 0-30min, 0-30h, 0-300h Sample chamber temperature: Room temperature - 50 °C (rotation speed 30r/min) Accuracy: ± 0.5 °C Sample chamber door: Built-in revolving door saves space, it is more convenient to install and take sample bottles Sample Rack: Resizeable sample holder for sample bottles of various sizes Observation window: The sample room is equipped with a lighting device that can check the status of the sample at any time through a large viewing window Safety protection: 1. Fully enclosed sample chamber 3, leakage protection device 5, stall protection function 7, drawer-type leakage prevention tray 2, sample chamber door open stop protection device 4, overload, overheat protection device 6, emergency stop device 8 Slow acceleration start and slow deceleration stop function Suitable sample containers: glass bottles, PE bottles, TEFLON bottles, PTFE bottles, ZHE containers Instrument material: All made of stainless steel Dimensions: 750W×500D×500H AC 220V 50/60Hz 900W (with heating)
Introduction: This product is designed and manufactured in accordance with the requirements of "Solid Waste Leaching Toxic Leaching Method Sulfuric Acid and Nitric Acid Method" (HJ/T 299-2007) and "Solid Waste Leaching Toxicity Extraction Method Acetate Buffer Solution" (HJ/T 300-2007). The company's patented sample container is installed at a 30-degree angle to the rotating shaft. The sample container is shaken while it is being flipped, increasing the collisions and friction between the samples in the container, making the sample react, elute, and extract in the container. More thorough. Scope of application: Research and application fields such as toxicity identification of environmental protection, chemical industry, fermentation, solid waste, medicine, chemical industry, surface water, industrial wastewater, domestic sewage, etc.
