Brief introduction: Difficult to fire and has the ability to prevent or delay the flame spread of wire and cable can usually refers to by GB/T18380.3 (equivalent to IEC60332-3) testing of wire and cable; Ty, teck cable fireproof BS6387 impact tester, and according to IEC 60331-12-2013 standard research and development production, used for flame temperature is not lower than 830 ℃, and exert a certain impact vibration, maintain the integrity of the testing instrument. Can test the cable of A, B, C, D flame retardant performance; Exert impact for fire, flame temperature is not lower than 830 ˚ C, is greater than or equal to the rated voltage 0.6/1 kv cable, the overall diameter of more than 20 mm Features: 1. With double flow meter and pressure regulation. 2. The test process of automatic control. 3. With intelligent detection function, when the specimen during short circuit test of automatic alarm and turn off the fire. 4. Take temperature measuring device 5. Burner nozzle for 500 mm long, 15 mm wide, with a Venturi mixer 6. Stainless steel stent impact structure; Body spray processing; 7. Independent motor impact control box; 8. Use propane or natural gas burner, the integral of the 400 mm long strip of the burner. Technical parameters: Display: touch screen, display temperature curve The timer: 0 ~ 99 hours, 99 points and 99 seconds Control box size: 650 X400 (D) (W) x (H) Test load: 0 ~ 600 v voltage is adjustable; Load current range: 0.1 ~ 3 a, test current can be adjusted according to the standard requirements, but more than 3 a protection; Hammer cycle (time) : 10 ~ 999 s (can be set, the standard requirement to 30 + 2 s /) Total test time: 0 ~ 9999 s Size: 1600 (W) x 850 x 1900 mm (H) (D) The console size: 600 (W) x 750 x 1200 mm (H) (D) Power supply: AC 380 v 3 - phase, 50/60 hz, 30 a Weight: 100 kg
Brief introduction: Difficult to fire and has the ability to prevent or delay the flame spread of wire and cable can usually refers to by GB/T18380.3 (equivalent to IEC60332-3) testing of wire and cable; Ty, teck cable fireproof BS6387 impact tester, and according to IEC 60331-12-2013 standard research and development production, used for flame temperature is not lower than 830 ℃, and exert a certain impact vibration, maintain the integrity of the testing instrument. Can test the cable of A, B, C, D flame retardant performance;
