TS8500S desktop spectrophotometer Introduction: The desktop spectrophotometer TS8500S is a spectrophotometer developed by 3nh using independent spectrophotometer core technology. It uses a dual array CMOS image sensor with high sensitivity and a wide spectral response range, making testing more accurate. It is connected to the upper computer software for easy and fast operation. Repeatability of reflection chromaticity values of TS8500S desktop spectrophotometer Δ E * ab ≤ 0.015, inter station difference Δ E * ab is controlled within 0.15, and the data is stable and reliable. Features: 1. Adopting an internationally recognized D/8 structure, compatible with SCI/SCE measurement, and supporting rapid measurement of SCI+SCE simultaneously 2. Dual array CMOS image sensor 3. Rich measurement indicators and multiple observation light sources 4. Automatic caliber recognition 5. Convenient measurement and wide sample adaptation 6. Automatic temperature and humidity compensation function, making measurement data more accurate 7. Adopting a combination of full spectrum LED light sources and UV light sources 8. Color management software Technical parameters: Product model: TS8500S (LED light source, no flat panel PAD) Lighting method: Reflection: D/8 (diffuse lighting, receiving in 8 ° direction); SCI/SCE measurement; Including UV/exclusion UV measurement; Transmission: D/0 (diffuse illumination, receiving in 0 ° direction) SCI/SCE measurement; Including UV/exclusion UV measurement; Haze (ASTM D1003); Ball size: Φ 154mm Lighting light source: 360~780nm combined LED light source, including UV, 400nm cutoff light source, 420nm cutoff light source, 460nm cutoff light source Splitting method: concave grating Sensor: 256 pixel dual array CMOS image sensor Measurement wavelength range: 360~780nm Wavelength interval: 10nm Half bandwidth: 5nm Reflectance measurement range: 0-200% Reflectivity resolution: 0.01 Light containing method: reflection SCI/SCE, transmission SCI/SCE Color Space: CIE LAB, XYZ, Yxy, LCh, CIE LUV, Musell, s-RGB, HunterLab, β Xy, DIN Lab99 Color difference formula: Δ E * ab, Δ E * UV, Δ E * 94, Δ E * cmc (2:1), Δ E * cmc (1:1), Δ E * 00, DIN Δ E99, Δ E (Hunter), Δ E * CH, 555 tone classification Observer angle: 2 °/10 ° Display: Spectral map/data, sample chromaticity value, chromaticity difference value/map, chromaticity map, color simulation, qualified/unqualified results, color deviation, color evaluation, haze, liquid chromaticity (achieved through upper computer) Measurement time: approximately 2.0s (while testing SCI/SCE for approximately 4s) Repeatability: Reflection chromaticity value: Φ 25.4mm/SCI, Δ E * ab within 0.015 (LED, after preheating and calibration of the instrument, measure the average value of the whiteboard 30 times at an interval of 5 seconds) Spectral reflectance/transmittance: ≤ 0.1% Inter station difference: Φ 25.4mm/SCI, Δ E * ab within 0.15 (BCRA series II 12 color plates measured average) Size: length x width x height=440X248X283mm Weight: approximately 13.5kg Power supply method: DC 24V, 3A power adapter power supply Lighting source lifespan: 5 years, greater than 3 million measurements Display screen: None Interface: USB, Bluetooth ® five Storage data: Shared PC storage space Operating temperature range: 0-40 ℃ (32-104 ° F) Storage temperature range: -20~50 ℃ (-4~122 ° F) Optional accessories: inverted bracket, culture dish, microporous (4mm) transmission test fixture component, film fixture
Introduction: The desktop spectrophotometer TS8500S is a spectrophotometer developed by 3nh using independent spectrophotometer core technology. It uses a dual array CMOS image sensor with high sensitivity and a wide spectral response range, making testing more accurate. It is connected to the upper computer software for easy and fast operation. Repeatability of reflection chromaticity values of TS8500S desktop spectrophotometer Δ E * ab ≤ 0.015, inter station difference Δ E * ab is controlled within 0.15, and the data is stable and reliable.
