TRZS-201 rapid moisture analyzer Introduction: This moisture meter can be widely used in coal, food, battery raw materials, battery electrodes, electrolytes, resins, resin powders, adhesives, films, chemicals, chemical raw materials, chemical powders, desiccants, organisms, salt, crystals, meat, sauces, agriculture, organic matter, soil, electronics, feed, calcium carbonate, coatings, plastics, plastic raw materials, rubber, silicone, textiles, and more. It also meets the requirements for determining the moisture content of solids, particles, powders, gels, and liquids, characteristic: TRZS-201 moisture analyzer is our company's moisture detection instrument. The moisture tester adopts a weighing system [electromagnetic balance sensor]. Its characteristics are reliable weighing, clear display, automatic detection system, simple automatic calibration device, and overload protection device. It is a moisture detection instrument that can also detect the solid content of various products (this instrument does not require installation, debugging, training, and can be used by unpacking, with simple and convenient operation) Technical parameters: Weighing range: 120g measuring range Moisture determination range: 0.001-99% Sensor accuracy: 0.001g Sample quality: 0.3-120g (results can be obtained in just a few minutes) Repeatability: ± 0.01% when the initial sample weight is ≥ 15g ± 0.005% when the initial sample weight is ≥ 20g Moisture content readability accuracy: 0.001% Test methods: 1. Fully automatic mode 2. Timer mode 0-99 minutes 3. Custom mode Testing time: 0-99 minutes (usually only a few minutes are needed to test the results, or you can set the testing time yourself) Heating source: 500W halogen ring lamp Heating temperature range: starting at -200 ℃ (the appropriate temperature can be adjusted according to the heating temperature requirements of the sample) Display parameters:% moisture, time, temperature, dry weight% Communication: RS232 communication interface - convenient for connecting printers, computers, and other peripheral devices, compliant with FDA/HACCP format requirements Dimensions: 320 × 205 × 215 (mm) Power supply: 220V ± 10%/110V ± 10% (optional) Frequency: 50Hz ± 1Hz/60Hz ± 1Hz (optional) Scale pan size (mm) diameter 90 Instrument weight: 6 KG
Introduction: This moisture meter can be widely used in coal, food, battery raw materials, battery electrodes, electrolytes, resins, resin powders, adhesives, films, chemicals, chemical raw materials, chemical powders, desiccants, organisms, salt, crystals, meat, sauces, agriculture, organic matter, soil, electronics, feed, calcium carbonate, coatings, plastics, plastic raw materials, rubber, silicone, textiles, and more. It also meets the requirements for determining the moisture content of solids, particles, powders, gels, and liquids,
