TOOL-LW-07NUV water-cooled ultraviolet laser Introduction: The TOOL series nanosecond lasers can be divided into TOOL water-cooled ultraviolet lasers, TOOL water-cooled green lasers, and TOOL water-cooled infrared lasers based on wavelength. Customers can choose different laser crystals according to their actual needs to achieve the final process requirements. Different laser crystals correspond to different optimal operating frequencies, and their corresponding optical parameters also vary to some extent. The TOOL series water-cooled laser has a small output spot and narrow pulse width, which can achieve more precise processing effects. The TOOL series level laser adopts an integrated structure, with a compact size and easy integration. The TOOL series water-cooled laser adopts professional copper tube technology for heat dissipation, with good laser heat dissipation effect and minimal thermal impact. There is no need to adjust the production and manufacturing process of the frame, and the laser performance is reliable and can operate stably for a long time. Application areas: Static and dynamic identification, material surface marking, assembly line flight marking, 3D rapid prototyping, micro hole processing, etc characteristic: 1. Integrated design, easy to integrate 2. Long life seed source with good beam quality 3. High quality alloy cavity with strong mechanical stability 4. The repetition frequency is adjustable from 100K to 2MH 5. Rs232 remote control 6. External TTL and PWM control 7. Meet the requirement of working 24/7 Technical parameters: Laser model: TOOL-LW-07NUV Wavelength: 355 Output average power: > 7W@40KHz Maximum single pulse energy: 0.23mJ@30KHz Pulse repetition frequency: 30-150 Pulse width: < 15ns@40KHz Average power stability (12 hours): <3 Space mode: TEM00 (M2< 1.2) Spot roundness: >90 Output port spot size (6x beam expansion): 3 Beam divergence angle: <0.2 Spot pointing stability: <20 Polarization degree: > 100:1 Horizontal Preheating time: <30 Operating environment temperature: 15 ℃ -30 ℃ Environmental humidity for use: 20 to 80 non-condensing Cooling method: Water Supply voltage: 12 Communication protocol: RS232 Volume: 265mm x 139mm x 121mm Weight: 2.5KG
Introduction: The TOOL series nanosecond lasers can be divided into TOOL water-cooled ultraviolet lasers, TOOL water-cooled green lasers, and TOOL water-cooled infrared lasers based on wavelength. Customers can choose different laser crystals according to their actual needs to achieve the final process requirements. Different laser crystals correspond to different optimal operating frequencies, and their corresponding optical parameters also vary to some extent. The TOOL series water-cooled laser has a small output spot and narrow pulse width, which can achieve more precise processing effects. The TOOL series level laser adopts an integrated structure, with a compact size and easy integration. The TOOL series water-cooled laser adopts professional copper tube technology for heat dissipation, with good laser heat dissipation effect and minimal thermal impact. There is no need to adjust the production and manufacturing process of the frame, and the laser performance is reliable and can operate stably for a long time. Application areas: Static and dynamic identification, material surface marking, assembly line flight marking, 3D rapid prototyping, micro hole processing, etc
