TOOL-LA-03NUV air-cooled ultraviolet laser Introduction: The TOOL series nanosecond lasers can be divided into TOOL air-cooled ultraviolet lasers, TOOL air-cooled green lasers, and TOOL air-cooled infrared lasers based on wavelength. Customers can choose different laser crystals according to their actual needs to achieve the final process requirements. Different laser crystals correspond to different optimal operating frequencies, and their corresponding optical parameters also vary to some extent. The TOOL series water-cooled laser has a small output spot and narrow pulse width, which can achieve more precise processing effects. The TOOL series level laser adopts an integrated structure, with a compact size and easy integration. The TOOL series water-cooled laser adopts professional copper tube technology for heat dissipation, with good laser heat dissipation effect and minimal thermal impact. There is no need to adjust the production and manufacturing process of the frame, and the laser performance is reliable and can operate stably for a long time. Application areas: static and dynamic identification, material surface marking, assembly line flight marking, 3D rapid prototyping, micro hole processing, etc. characteristic: 1. The integrated structure is easy to install 2. Mechanical stability, good quality of strong light beam 3. Rs323 remote design machine control 4. External TTL and PWM control 5. Installation of Class 1000 cleanroom 6. The repetition frequency can be adjusted from 10-150KHz Technical parameters: Laser model: TOOL-LA-03NUV Wavelength: 355 Output average power: > 3W@40KHz Maximum single pulse energy: 0.1mJ@30KHz Pulse repetition frequency: 30-150 Pulse width: < 15ns@40KHz Average power stability: <3 Space mode: TEM 00(M 2<1.2) Spot roundness: >90 Output port spot size (6x beam expansion): 3 Beam divergence angle: <0.2 Spot pointing stability: <20 Polarization degree: >100：1 Horizontal Preheating time: <30 Operating environment temperature: 15 ℃ -30 ℃ Environmental humidity for use: 20to80non-condensing Cooling method: Air cooling Supply voltage: 12 Communication protocol: RS232 Volume: 237mmx116mmx120mm Weight: 2.5KG
Introduction: The TOOL series nanosecond lasers can be divided into TOOL air-cooled ultraviolet lasers, TOOL air-cooled green lasers, and TOOL air-cooled infrared lasers based on wavelength. Customers can choose different laser crystals according to their actual needs to achieve the final process requirements. Different laser crystals correspond to different optimal operating frequencies, and their corresponding optical parameters also vary to some extent. The TOOL series water-cooled laser has a small output spot and narrow pulse width, which can achieve more precise processing effects. The TOOL series level laser adopts an integrated structure, with a compact size and easy integration. The TOOL series water-cooled laser adopts professional copper tube technology for heat dissipation, with good laser heat dissipation effect and minimal thermal impact. There is no need to adjust the production and manufacturing process of the frame, and the laser performance is reliable and can operate stably for a long time. Application areas: static and dynamic identification, material surface marking, assembly line flight marking, 3D rapid prototyping, micro hole processing, etc.
